Table of Contents
Advertisement
QLM SETTINGS
SETTINGS: HARDWARE
For more information, see The Device List.
ALLOW SIMULTANEOUS CONNECTIONS
If this box is checked, QuickLink Mobile will allow you to
establish more than one connection at a time.
If this box is NOT checked, QuickLink Mobile will prompt
you to disconnect before allowing you to establish a second
connection.
PROMPT BEFORE SWITCHING CONNECTIONS
The QuickLink Mobile software can automatically switch to a
higher priority network if one becomes available. However,
since the original connection is shut down once the new
connection is fully established, this has the potential to dis-
rupt any activity that was relying on the original connection.
If this box is checked, QuickLink Mobile will prompt you for
permission to switch networks before it actually does so.
INCLUDE SUPPORT FOR OTHER NETWORK CONNEC-
TIONS
When this box is checked, QuickLink Mobile will monitor
devices listed in the "Other Devices" group. When it detects
that a device listed in this group has established a connec-
tion, it can respond by shutting down its own connections.
For example, it can shut down a wireless connection it has
established when you connect to an Ethernet network. For
a disconnection to occur, both of the following must also
be true.
44
Advertisement
Table of Contents
