Hasselblad Flextight 848 User Manual page 18

Hardware Reference - Flextight 848
18
Operating Instructions
...continued
9.
10. Go to your computer and follow the directions given in the
Lay the top layer of the holder down flat over the original.
• For transparency holders, the top layer is magnetic, which will
hold the original fast.
• For the reflective holder, note the four metal pegs (the top two are
shown as A and C in Figure 5 below); make sure that the clear
plastic sheet is pressed all the way down over all four pegs. Note
also the two curved tabs at the top of the holder (B in the figure
below); the clear sheet must slip under each of these tabs, as
shown.
A
Figure 5: Reflective holder, top
FlexColor software manual to take a preview, make settings, and
take the final scan.
B
User's Guide - Flextight 848
C