•
When you switch on the scanner, the Feeder will position itself into
its "home" position, if not already there. Do not touch the Feeder
while the magazine is moving.
•
Before servicing the scanner and/or Feeder, the power supply must be
disconnected from the mains (unplugged). It is not sufficient simply
to press the on/off button on the scanner.
•
Install the scanner and Feeder in a location where they are not acces-
sible by children. The units contain small openings and moving parts
that can cause injury.
•
When using the Feeder, a huge amount of data is generated. Make
sure to allocate ample hard disk space for scanned images on the disk
of the attached host computer.
When Operating the Feeder
•
Do not touch the Feeder while the magazine is moving.
•
Do not touch the originals or the original holders during scanning.
•
Do not start scanning or previewing until an original holder with an
original has been mounted.
•
Flexible original holders are only to be mounted or removed when the
drum is in the load position.
System Requirements
For All Users
•
Hasselblad Flextight 848 or 949 Scanner.
•
Additional original holders.
For Macintosh Users
•
A computer running Mac OS 10.2.1 or later
•
FlexColor 4.0.2 or later for Mac OS
For Windows Users
•
A computer running Windows 2000 or XP
•
FlexColor 4.0.2 or later for Windows