Table of Contents
Advertisement
5.
Click on the
Align Feeder
which will now guide you through the procedure of aligning the
feeder.
You have already loosened the nut, so just click on
6.
The scanner moves into its adjustment (home) position and the
window updates with new instructions.
Feeder
Place the adjustment tool in the slit between the first and second mag-
azine position on the Feeder as shown in Figure 9. Position the notch
at the end of the tool over the adjustment pin inside the Feeder.
button. The
Align Feeder
window opens,
.
Continue
Align
Advertisement
Table of Contents
