Front Panel - Hasselblad Flextight 343 User Manual

Front Panel

A
B
Figure 1: Front panel features of Flextight 343
Feed Table: place original holders here for scanning. The table can
A
be folded up to keep dust from entering the scanner and to keep it
out of the way.
Light Area: for viewing originals. The grid helps you to align the
B
originals.
Indicator light: The indicator can light up in 3 different colors
C
indicating the following:
Green (Power/Ready) - remains lit when ready to scan. Flashes
when first installed to indicate that firmware must be loaded (it will
be loaded automatically when you run FlexColor).
Yellow (Motor Drive) - when drum is repositioning.
Red (Scanning) - when scanning. Do not touch the scanner while
the indicator is red. If the light is flashing when not scanning, then
an error has occurred - please contact your Flextight dealer for
assistance.
Power Switch: press to turn the unit on/off.
D
Original Holder Clasp: all original holders slide into a slot here and
E
are held in place by magnets.
User's Guide - Flextight 343
Hardware Reference - Flextight 343
7
Front Panel
C
D
E