Sony PVM-741 Brochure & Specs page 3

Accurate Color Reproduction and Consistency
As Sony's Super Top Emission OLED display panel itself
reproduces high-purity colors and in combination with the
10-bit panel driver and Sony's signal processing technology,
the PVM-741 monitor achieves broadcast standards (ITU-R
BT.709, SMPTE-C, and EBU).
Robust, Light-weight, and Compact Body
Flexible Styling
Incorporating a light-weight and compact aluminum diecast
body with a detachable AR-coated protection panel, this
model is flexible enough to change configuration according
to user requirements: with or without a stand (which is
easily detachable), tilted on a stand (15-degree slant),
rackmounted, or set on a camera pedestal.
PVM-741 PVM-741
without stand with standard stand
Retractable Carrying Handle
The PVM-741 provides a retractable carrying handle as a
supplied accessory. With this carrying handle, users find
it easy to carry this superb OLED performance anytime,
anywhere.
PVM-741 with carrying handle Carrying handle is retracted
Mounting Flexibility
The PVM-741 is 3.8U high and half-rack wide. Using the
optional MB-531 mounting bracket with a 10-degree-forward
and 10-degree-backward nonstop-tilt capability, two units can
be installed side by side in a 19-inch EIA standard rack.
PVM-741 installed in the optional MB-531 19"
mounting bracket with MB-532 mounting panel
Every PVM-741 monitor is precisely color-calibrated at the
factory. In addition, the PVM-741 monitor is also equipped
with Sony's unique feedback circuit system. This system works
to constantly monitor emitted light, to feed back monitor
results, and to adjust white balance. This ensures color and
gamma consistency, and reduces user maintenance tasks.
Easy Mounting into A Camera System
With 3/8-inch and 1/4-inch screw holes on its base, the
PVM-741 can be installed in a camera system. Also, with the
supplied arm-mount bracket fixed on the top, the PVM-741
can be installed in a camera arm.
PVM-741 rear and
bottom
PVM-741
with standard
stand tilt (15°)
ENG Kit VF-510
For use in ENG and EFP field, the optional VF-510 ENG Kit
provides a viewing hood, carrying handle, and connector
protector.
Detachable AR (anti-reflection) -coated
Protection Panel
AR-coated protection panel keeps the OLED panel surface
from scratching and keeps reflection from ambient light to a
minimum.
AC/DC Operations
The PVM-741 can be operated
with two-way power supplies:
DC 12 V and AC via the attached
dedicated AC adaptor.
1/4 inch hole
3/8 inch hole
Arm-mount bracket is
attached on the top
PVM-741 with VF-510 ENG Kit
Detachable AR-coated protection panel
PVM-741 rear view
with AC adaptor
3