Akai DLC-E2250 User Manual page 62


Use a supplied antenna cable to connect the TV signal to the LCD LED TV's TV CABLE
terminal.

Connect the DC plug of the AC-DC adapter to the DC 12V port at the rear of the
TV. Connect the power cord to the AC-DC adapter and wall outlet.

Press the button on the remote to turn on the LCD LED TV.
Always disconnect the LCD LED TV from the power outlet when the LCD
LED TV will not be used for a long period of time.
The POWER button on the front panel is only used for switching the LCD
LED TV into standby, it does not disconnect the device from the main
voltage. To completely disconnect the main voltage, please remove the
power plug from the socket.

Press the
INPUT
select DTV/TV, and press the OK button.
VHF/UHF IN
button on the remote to display the Source List. Use the ▲▼ buttons to
59
Installing the LCD LED TV