Configuring Dhcp Server - Yealink SIP-T2 Series Auto Provisioning Manual

4. Locate the root directory from your local system.
5. Check the server URL (e.g., http:// 10.2.11.101:8088/ProvisioningDir/) by clicking
"Open in browser".
Yealink IP phones also support the Hypertext Transfer Protocol with SSL/TLS (HTTPS)
protocol for auto provisioning. HTTPS protocol provides the encrypted communication and
secure identification. For more information on installing and configuring an Apache HTTPS
Server, refer to the network resource.
This section provides instructions on how to configure a DHCP server for Windows using
DHCP Turbo. You can download this software online:
http://www.tucows.com/preview/265297
Before configuring the DHCP Turbo, make sure:
The firewall on the PC is disabled.

There is no DHCP server in your local system.

To configure the DHCP Turbo:
1. To start the DHCP Turbo application, double click localhost.
and install it following the setup wizard.
Appendix
55