Rane TTM 56 Datasheet

Description
Rane takes performance mixer design as seriously as performing
DJs take their art form. In an effort to provide the best instru-
ment possible, Rane devoted two years of R&D to developing a
mixer with unparalleled performance. The TTM 56 is flexible,
durable, and feature packed. The audio quality of the TTM 56
qualifies it for use in the most demanding live venue, recording
studio or live broadcast applications.
Non-Contact Crossfader and Channel Faders
Rane's patented magnetic fader is the fastest, most accurate,
and longest lasting on the planet. The design uses non-contact
magnetic position sensor technology previously reserved for the
most demanding aerospace and industrial applications. No travel
noise - No bleed - Ever! Unlike optical non-contact faders, the
magnetic fader is impervious to smoke, moisture, temperature
and aging. The electrical performance is totally unaffected by
use. The mechanical life of the magnetic fader exceeds 10 million
operations.
These magnetic faders know exactly what your hand is doing!
A proprietary curve-translation module converts your hand mo-
tion into precise audio level control. The TTM 56 offers the user
more flexible curve selection and fader assignment options than
ever before. This technology is used for both Channel Faders and
the Crossfader.
The Crossfader control includes Reverse switch, Mode switch
and independent, continuously adjustable Contours for A-side
and B-side. In Mode 1, the Contour control adjusts from smooth
blend to extremely fast cut. Select Mode 2 for center-cut effect
(PGM 1 and PGM 2 off in the center) with full range Contour
control.
The Channel Fader controls include Reverse switches, Mode
switches and continuously adjustable Contours. In Mode 1, the
Contour control adjusts from smooth blend to extremely fast cut.
Select Mode 2 for Left/Right pan effect with Contour control.
The Channel Reverse switch allows left and right hand Channel
Faders to control Program 1 or Program 2.
Post-Fader FlexFx™
Rane's proprietary FlexFx effects loop allows assigning post-fader
Program 1, post-fader Program 2 or both to the effects loop. A
Wet/Dry pan control gives the user total control of how much
processed signal is in the mix. With the effects loop post-fader,
reverb and other delay effects respond to both Channel Fader
and Crossfader operation.
Stereo Metering
The TTM 56 features two 10-segment meters with peak-hold.
A source switch allows users to select dual-mono Cue or stereo
Master operation. No need to stress over dropping a channel
without knowing.
DATA SHEET
PERFORMANCE MIXER
CONTOUR A CROSSFADER
REVERSE MODE
Auxiliary Input and Output (Session Mix)
A stereo Aux Input with a Level control provides input for a
session mix, drum machine or other auxiliary input signal. The
stereo Aux Output with Level control provides output for session
mix, booth monitoring, recording or second zone.
3-Band Accelerated-Slope™ Full-Cut EQ
The TTM 56 provides 3-band, full cut tone controls for Program
1 and Program 2. EQ engage switches allow A/B comparison
and the ability to quickly cut or add EQ effect.
TTM 56
Top View
CONTOUR B HEADPHONES
Front View
Data Sheet-1
PWR