Front Panel Description - Rane MLM82S Operator's Manual

FRONT PANEL DESCRIPTION

MONO MIC / LINE INPUTS
1 2
4 6 4
2 8 2
0 10 0
A+B
SIG / OL LEVEL ASSIGN SIG /OL LEVEL
1 2 3
1 SIGnal present/OverLoad LED. This bi-color LED lights green for a -30 dBu signal, and turns red when the Input is within 3
dB of clipping.
2 MONO MIC/LINE INPUT LEVEL controls 1-4 determine the MIC/LINE preamp gain and mix level to be assigned to the A,
A+B, B Outputs.
3 ASSIGN switches determine between the A, A+B or B Outputs for each MIC/LINE input.
4 STEREO LINE INPUT LEVEL controls 5-8 determine the amount of stereo or mono line Input routed to the Outputs.
5 MONO switch mixes the A and B sides of each STEREO LINE input together. When active, the associated LED lights, and the A
and B Inputs for that channel have exactly the same level.
6 OUTPUT OverLoad LED illuminates within 3 dB of an approaching overload condition. To avoid this, the associated OUT-
PUT LEVEL control may be decreased, or the problem-causing individual Input Level may be lowered.
7 A and B OUTPUT LEVEL controls set the Output Level for A and B outputs.
8 POWER LED is lit whenever adequate power is applied to the unit.
Manual-2
3 4
6 4 6 4 6
8 2 8 2 8
10 0 10 0 10
A+B A+B A+B
ASSIGN SIG /OL LEVEL ASSIGN SIG /OL LEVEL ASSIGN
STEREO LINE INPUTS
5 6 7
4 6 4 6 4 6
2 8 2 8 2 8
0 10 0 10 0 10
MONO MONO
LEVEL LEVEL LEVEL
4 5
OUTPUTS
8 A
4 6 4 6 4
2 8 2 8 2
0 10 0 10 0
MONO MONO
LEVEL OL LEVEL OL
6 7
B
6
MLM82S
MIC / LINE MIXER
8
10
LEVEL POWER
8