How To Use Tower Heater Controls - Vornado ATH1 Owner's Manual

How To Use Tower Heater Controls

1
6 English
3
4
2
Power On/Off
1
Press ( ) to turn unit On or Off. LED light illuminates when the
unit is On. When turning the unit Off, the display will countdown
8 seconds. This time allows the heater to cool before shut down.
Temperature Control
2
Allows you to select your desired comfort level. Press (
increase the set temperature. Press (
temperature. The heat output will be adjusted automatically, to
accurately maintain the room temperature.
Fan Control
3
Press ( ) to select either Continuous (C) or Auto (A). In
Continuous mode (C), the Fan will run Continuously on high
speed when High Heat (H) is selected, or Continuously low
speed when Low Heat (L) is selected.
In Auto mode (A), the Fan speed will fluctuate to efficiently
maintain set temperature.
4
Heat Setting Control
Press ( ) to select either (L) Low Heat (maximum of 750 watts) or
(H) High Heat (maximum of 1500 watts).
) to
) to decrease the set