Table of Contents
Advertisement
7 Adjust system
settings
Select blackout setting
You can set the screen to turn off automatically
after the unit is idle for 10 or 20 seconds.
1
Press MENU/DISP for 3 seconds.
2
Turn
to select a setting:
•
[BKO 10 S] : Turn off the screen
automatically 10 seconds after last
operation.
•
[BKO 20 S] : Turn off the screen
automatically 20 seconds after last
operation.
•
[BKO OFF] : Never turn off the
screen.
Turn demo mode on/off
When demo mode is on, when the unit is idle for
more than 2 minutes, all functions are displayed.
1
Press MENU/DISP for 3 seconds.
2
Press
or
repeatedly to until [DEMO]
is displayed.
»
The screen shows current Demo
mode setting.
3
Turn to select a setting:
•
[DEMO ON] : Turn on the demo
mode.
•
[DEMO OFF] : Turn off the demo
mode.
Select start volume
Each time you turn on the unit, it can play at the
last listened volume or at the preset volume.
1
Press MENU/DISP for 3 seconds.
2
Press
or
repeatedly to until [V -
LAST] or [V - ADJ] is displayed.
20
EN
3
Turn
to select a setting:
•
[V - LAST] : Each time you turn on
the unit, the volume remains from its
previous use.
•
[V - ADJ] : Each time you turn on the
unit, the volume is at the preset level.
Store preset volume
You can turn on the unit at a preset volume.
1
Select [V - ADJ] as the start volume.
2
Press MENU/DISP for 3 seconds.
3
Press
or
repeatedly to until [A-VOL]
is displayed.
4
Turn
to select a value: 0 - 47.
Turn beep sound on/off
Each time you press a button, the unit beeps.
You can turn off/on this beep sound.
1
Press MENU/DISP for3 seconds.
2
Press
or
repeatedly to until [BEEP
ON] or [BEEP OFF] is displayed.
3
Rotate
to select a setting:
•
[BEEP ON]: Turn on the beep sound.
•
[BEEP OFF]: Turn off the beep sound.
Turn display scroll on/off
For track information that is longer than the
display panel: you can select to cut off the
remainder of the text, or scroll to display the
full text.
Note
•
If any special characters are present in the
MP3 track name or album name, it may not
display correctly on the screen because these
characters are not supported.
•
Some WMA is protected by Digital Rights
Management (DRM), it cannot be played on
the unit.
•
Folders/files exceed the supported limit of the
unit are not displayed or played.
1
Press MENU/DISP for 3 seconds.
Advertisement
Table of Contents
