Auto-Power-Off (Apo); Setting Apo; Apo Operation; Time-Out-Timer (Tot) - Alinco DJ-175 T Instruction Manual

5.5

Auto-Power-Off (APO)

This function prevents an useless battery consumption.

5.5.1 Setting APO

Press the FUNC key, and while
displayed on the LCD, and the Auto-Power-Off function is set. Repeat the same to
turn it off.
• The initial setting for the APO function is off.

5.5.2 APO Operation

• After having activated the APO and about 30 minutes elapse without any key-operation,
the unit turns off automatically alerting with beep sounds. The time to Auto-Power-Off
is determined by the last key operation only, not the last signal received.
5.6

Time-Out-Timer (TOT)

This function automatically stops transmission when a preset time is elapsed.

5.6.1 Setting TOT

1. Press the FUNC key, and while
OFF is displayed on the LCD.
2. Rotate the dial to change the TOT setting time.
The maximum setting for the TOT time is 450 seconds.
OFF
3. Press any key other than the MONI key to complete the setting.

5.6.2 TOT Operation

When the preset time is about to be elapsed, a beep sounds to alert that the unit is
forced to quit transmitting. Release PTT key to quit transmitting otherwise the TOT
penalty may be activated. Refer to page 44 for TOT penalty time setting.
is displayed on the LCD, press the
is displayed on the LCD, press the
30 60 90 ------
5.Useful Functions
key. is
key. T-
450
(unit: seconds)
33
5