Heartland 9200 Installation And Operating Instructions Manual page 8

Steel Washer
-Remember when working with the closet, the closet is top heavy . Use your hand to support it during
installation.
-With a helper,lift closet assembly from box by area that is circled. (See Fig.1 Page 2).
-Rest the closet assembly on the carton,while your helper steadies the closet,peel the closet backing of f the
gasket and stick one on each bracket.
-Place closet assembly onto stove bod y. (See diagram above).
-Line up holes in the bottom (foot) of the bracket with the holes in the stove top,while one person supports the
closet, fasten the closet brackets to the stove top with machine screws.
-To fasten the splashback to the rear of stove, with the Model 7200 use 5 sheet metal screws and washers.
Sheet metal
screw
Steel washer
Machine screw
Sheet metal
screw (black)
Bracket
Gasket - Peel off
backing and stick on.
Nut
Machine screw
(Nickel Plated)
6
Gasket