Changing The Lcd Monitor Display - Sanyo VPC-E1600TP Instruction Manual

Changing the LCD Monitor Display

The type of information displayed on the LCD monitor can be changed taping the onscreen display
button. Tap the button repeatedly to change the LCD display from one type to another. In
Photo/Movie Mode, the LCD display can be changed into any of the following:
• Basic
• Full
• None
• Guideline
• The OSD information may vary depending on the record mode type.
• The following icons, if enabled, are still displayed on the LCD even when OSD
off or Guide lines on: AEB, AF lamp, Drive mode, Flash and Macro.
• Use the "Guide lines" to properly set image for capture.
In Playback mode, the LCD display can be changed into any of the following:
• Basic
• Full
• None
LCD display cannot be changed in the following situations:
• Recording video or audio clips.
• Playing video or audio clips.
• Playing slideshow.
30