Changing The Lcd Monitor Display; Recording Images, Videos And Voices; Taking Images - Sanyo  Instruction Manual

Changing the LCD Monitor Display

The type of information displayed on the LCD monitor can be changed using the
button repeatedly to change the LCD display from one type to another. In Photo/Movie Mode, the LCD
display can be changed into any of the following:
• Basic
• Full
• None
• Guideline
• Help screen
• The OSD information may vary depending on the record mode type.
• The following icons, if enabled, are still displayed on the LCD even when OSD off or
Guide lines on: AEB, Face tracking, AF lamp, Drive mode, and Macro.
• Use the "Guide lines" to properly set image for capture.
In Playback mode, the LCD display can be changed into any of the following:
• Basic
• Full
• None
• Help screen
LCD display cannot be changed in the following situations:
• Adjusting Aperture value/Shutter speed under Manual exposure mode.
• Adjusting Aperture value under Aperture Priority mode.
• Adjusting Shutter speed under Shutter Priority mode.
• Recording video or audio clips
• Playing video or audio clips
• Playing slideshow

Recording Images, Videos and Voices

Taking Images

Now that you are familiar with your camera, you are now ready to take your images. Taking images with
your camera is very simple.
1. Turn on the camera by pressing the Power button.
2. Slide the Mode switch to Photo mode
3. Frame the shot using the focus bracket on the LCD monitor.
See illustration on the right.
4. Pressing the Shutter button down halfway automatically
focuses and adjusts the exposure, and pressing the Shutter
button down fully captures the images.
When the shake warning icon
steadily, with your arms at your side or use a tripod to stabilize
the camera to prevent blurred images.
.
appears, hold the camera
21
button. Press the