NETGEAR GS724T Administration Manual page 17

To display the 802.1AS Configuration page click the Switching tab, then click 802.1AS >
Basic > 802.1AS Configuration.
\
To configure the global 802.1AS settings on the switch:
1. Enable or disable 802.1AS globally on the switch. The default mode is Enable.
2. Configure the Priority1 value of the local clock (this time-aware bridge).
3. Configure the Priority2 value of the local clock (this time-aware bridge).
4. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
5. If you make any changes to the page, click Apply to retain the changes to the system.
The following table shows the non-configurable information on the 802.1AS Configuration
page.
Table 1-1.
Field
GrandMaster Present
Best Clock Identity
Best Clock Priority1
Best Clock Priority2
GS716T and GS724T Gigabit Smart Switches
Description
Identifies whether Grand Master Clock is present. The default is False.
Shows the Best Clock Identity detected by this time-aware bridge.
Shows the Priority1 value of the best clock on the switch.
Shows the Priority2 value of the best clock on the switch.
Ethernet Audio Video
18