NETGEAR ProSafe WNDAP350 Reference Manual page 31
Prosafe dual band wireless n access point
Hide thumbs
Also See for ProSafe WNDAP350:
- User manual (136 pages) ,
- Reference manual (104 pages) ,
- Product data (2 pages)
Table of Contents
Advertisement
ProSafe Dual Band Wireless N Access Point WNDAP350 Reference Manual
Figure 2-6 Time zone and system time related settings
2. Configure the following information:
–
Time Zone. From the pull-down menu, select the local time zone for your wireless access
point from a list of all available time zones. The default is USA-Pacific.
–
NTP Client. Enable NTP Client to synchronize the time of the access point with an NTP
Server. The Default is Enabled.
Note: You must have an Internet connection to get the current time.
–
Use Custom NTP Server. Check the option if you have a custom NTP server. The default
is Disabled.
–
Hostname / IP Address. Enter the host name or the IP address of the custom NTP server.
The default is time-b.netgear.com.
3. Click Apply.
Basic Installation and Configuration
v2.0, April 2013
2-9
Advertisement
Table of Contents
