Ordering Information - NETGEAR ProSafe GS724AT Datasheet

ProSafe 24-port Gigabit Smart Switch with Advanced Features
®
Technical Specifications
• Network Protocol and
Standards Compatibility:
– IEEE 802.3 10BASE-T
– IEEE 802.3u 100BASE-TX
– IEEE 802.3ab 1000BASE-T
– IEEE 802.3z 1000BASE-X
– IEEE 802.3x full-duplex flow control
• Interfaces
– 24 10/100/1000 Mbps switching ports
– 4 built-in shared SFP Gigabit
Ethernet fiber ports for
100/1000 Mbps connectivity
– Auto-sensing and auto-negotiating
capabilities for all copper ports
– Auto Uplink™ on all ports to make the
right connection
• Administrative Switch Management
– IEEE 8021.Q VLAN (128 groups, Static)
– Auto-voice VLAN
– IEEE 802.1p Class of Service (CoS)
– Port-based QoS
– IEEE 802.3ad static or dynamic link
aggregation (LACP)
– IEEE 802.1D Spanning Tree Protocol
– IEEE 802.1ab LLDP & LLDP-MED
– SNMP v1, v2c, v3
– RFC 1213 MIB II
– RFC 1643 Ethernet Interface MIB
– RFC 1493 Bridge MIB
– RFC 2131 DHCP client
– RMON group 1, 2, 3, 9
– Private Enterprise MIB
– IEEE 802.1x (RADIUS)
– RADIUS accounting
– Access control list (ACL)
– Layer 3- and 4-based Quality of
Service (QoS)
– TACACS+
– RADIUS accounting
– Port-based security by locked
MAC addresses
– IGMP snooping
– Storm control for broadcast, multicast
and unknown unicast packets
– Port-based ingress/egress rate limiting
– SNTP
– Port mirroring support
4500 Great America Parkway
Santa Clara, CA 95054 USA
1-888-NETGEAR (638-4327)
E-mail: info@NETGEAR.com
www.NETGEAR.com
– Web-based configuration
– Configuration backup/restore
– Password access control
– Firmware upgradeable
– Cable test
• Performance Specifications
– Forwarding modes: Store-and-forward
– Bandwidth: 48 Gbps
– Network latency: Less than 3
microseconds for 64-byte frames in
store-and-forward mode for 1000
Mbps to 1000 Mbps transmission
– Buffer memory: 3 MB
– Address database size: 8,000 media access
control (MAC) addresses per system
– Addressing: 48-bit MAC address
– Mean time between failure (MTBF):
330,000 hours (~37 years)
• LEDs
– Unit: power, fan
– Per port: Link, speed, activity
– Per Gigabit port: Link, speed,
activity, stack
• Power Supply
– Power Consumption: 35.6W
– 100-240V AC/50-60 Hz universal input
• Physical Specifications
– Dimensions (h x w x d):
43 x 440 x 205 mm
(1.69 x 17.32 x 8.07 in)
– Weight: 3.1 kg (6.83 lb)
• Environmental Specifications
– Operating temperature: 32° to 131° F
(0° to 55° C)
– Storage temperature: -4° to 158° F
(-20° to 70° C)
– Operating humidity: 90% maximum
relative humidity, non-condensing
– Storage humidity: 95% maximum
relative humidity, non-condensing
– Operating altitude: 10,000 ft
(3,000 m) maximum
– Storage altitude: 10,000 ft
(3,000 m) maximum
• Electromagnetic Compliance
– CE mark, commercial
– FCC Part 15 Class A
– VCCI Class A
– EN 55022 (CISPR 22)
©2008 NETGEAR, Inc., the NETGEAR logo, Connect with Innovation, Everybody's connecting, FrontView, the Gear Guy logo, IntelliFi,
ProSafe, ReadyNAS, RAIDar, RAIDiator, RangeMax, X-RAID, and Smart Wizard are trademarks of NETGEAR, Inc. and/or its subsidiaries in
the United States and/or other countries. Microsoft and Windows are trademarks of Microsoft Corporation in the United States and/or other
countries. Other brand and product names are trademarks or registered trademarks of their respective holders. Information is subject to
change without notice. All rights reserved.
*Free basic installation support provided for 90 days from date of purchase. Advanced product features and configurations are not included
in free basic installation support; optional premium support available.
†
Lifetime warranty for product purchased after 05/01/2007.
– EN 55024 (CISPR 24)
– C-Tick
• Safety
– CE mark, commercial
– CUL 60950 (Listed)/ EN 60950
(Low Voltage Directive)
Warranty
– NETGEAR Lifetime Warranty
System Requirements
– Category 5 network cables
– Network card for each PC
– Network software (e.g., Windows
Modules
– AGM731F ProSafe 1000BASE-SX
SFP GBIC: Module with LC connectors
for 50um or 62.5um multi-mode
fiber cable
– AGM732F ProSafe 1000BASE-LX SFP
GBIC: Module with LC connectors for
9um single-mode fiber cable
– AGM733 ProSafe 1000BASE-LZ SFP
GBIC: Module with LC connectors for
9um single-mode fiber cable
Package Contents
– ProSafe 24-port Gigabit Smart Switch
with Advanced Features (GS724AT)
– Rubber footpads
– Power cord
– Rack-mount kit
– Resource CD Installation Guide
– Warranty/support information card

Ordering Information

– North America: GS724AT-100NAS
Europe: GS724AT-100EUS
UK: GS724AT-100AUS
Asia: GS724AT-100JPS
ProSupport Information
®
• OnCall 24x7, Category 1
– PMB0331NA
– PMB0331EU
– PMB0331-100AUS
– PMB0331JP
• XPressHW, Category 1
– PRR0331NA
– PRR0331EU
– PRR0331-100AUS
– PRR0331JP
GS724AT
†
)
®
D-GS724AT-0