Care And Maintenance; Troubleshooting - Vector MINI FRIDGE COOLER AND WARMER Owner's Manual & Warranty Information

OBSERVE ALL CAUTIONS AND WARNINGS.

CARE AND MAINTENANCE

The Mini Fridge
™
years of dependable service.
- After each use, clean the unit, inside and out, with a soft cloth and mild
soap solution.
- Do not scrape, scratch or puncture the surface of the unit with sharp objects
or abrasives.
- Dry the unit properly and store in a cool, dry place.
- Always make sure the power cord and converter are disconnected before
storing.
- Never allow the unit to be immersed in liquid.

TROUBLESHOOTING:

Problem/Possible Cause/Remedy
• Mini Fridge
™
(fan is not turning)
• Accessory outlet of DC power supply is not functioning-check by plugging
in a 12VDC appliance. If not, clean accessory outlet and reconnect the
Cooler and Warmer .
Mini Fridge ™
• Fuse or circuit breaker in accessory outlet is open. Reset breaker or check fuse, and
replace fuse if necessary. (See paragraph below)
• Ignition is switched off - start engine or switch ignition to "accessory" position.
• Fuse in unit's DC power plug is blown - see Fuse Replacement section for location of
fuse and instructions for checking and replacing fuse.
- Refrigerator/warmer is not cooling or heating properly (fan is not turning).
• Fan is defective. Call Vector Customer Service Department for return/replacement
instructions. This unit is not user-serviceable, it must be returned to Vector
Manufacturing for professional service or repair. Any attempt to service by user will
void warranty.
- Refrigerator/warmer is not cooling or heating, but fan is turning
• Cooling unit is defective. Call Vector Customer Service Department for
return/replacement instructions. This unit is not user-serviceable, it must be returned
to Vector Manufacturing for professional service or repair. Any attempt to service by
user will void warranty
- Refrigerator/warmer takes longer than 2 hours to reach desired temperature inside
• Low battery or supply voltage. Check converter output
• Unit will attain desired temperature more efficiently if items are pre-heated
or pre-chilled
• Fan area is blocked - Move unit or object
Cooler and Warmer is ruggedly constructed to provide
Cooler and Warmer is not functioning as cooler or warmer
8