Vector MINI FRIDGE COOLER AND WARMER Owner's Manual & Warranty Information page 4

• Rests on vehicle seat or floor for easy access
• Extra-long, 7-foot, 12 volt DC power cord with 12 volt DC plug; equipped with
built-in 10-amp fuse to protect the unit and power source
• Durable, weather resistant construction and easy-open and close lid
• Environment-friendly CFC-free polyfoam liner
• Cold/heat transfer to foods via temperature-efficient liner
• Built-in heat dissipation fan with long-life, brushless motor
• HOT/OFF/COOL sliding power switch
• Automatic shut-off to prevent overheating of unit
• Built-in LED "cool" and "hot" indicators
CAUTIONS:
• This unit is intended for use with the supplied 12 volt DC power source
(converter) that can provide at least 4 amperes of current. DO NOT attempt to
use with any other power source
• NEVER operate unit in an enclosed space. ALWAYS ensure that there
is adequate ventilation and free flow of air around the unit, so that warm air
expelled by the fan is effectively dissipated
• When operating the unit in a vehicle or boat cabin, adequate ventilation must
be provided by an air conditioning system or open window. In a car with
windows up, air temperatures can reach 150 degrees F
• This unit is intended for portable use only; it is not designed to be
built-in or recessed - this would interfere with the unit's air dissipation
system, and could cause a fire or other safety hazard
• Use only with the supplied power cord. If cord becomes worn or
damaged,
Department for authorized replacement
• Never allow the cooler/warmer or AC/DC converter to be immersed in water
or other liquid. This will void the warranty
• Make sure the AC/DC converter is connected to 110/120 V AC, 60 Hz power
• Do not leave plugged in. Disconnect AC/DC converter when not in use, or
when cooler is turned to the OFF position
discontinue use and call Vector
4
Customer Service