Table of Contents
Advertisement
FUSE REPLACEMENT
If the DC socket is powered, but the unit does not operate, then the cooler/warmer
fuse may be open. The power cord is fuse-protected against short-circuiting, by a 10-
amp fuse located in the tip of the DC accessory plug.
To inspect or replace the DC Power Cord Fuse
1. Unscrew the end-cap of the DC accessory plug.
2. Remove fuse, inspect it for an open element, and replace with a new
10-amp fuse, if needed.
3. Re-attach the end-cap to the plug.
4. If new fuse opens, call Vector® Customer Service department for further
instructions and possible return/replacement. This unit is not user-serviceable,
it must be returned to Vector® Manufacturing for professional service or repair.
Any attempt to service by user will void warranty.
CARE AND MAINTENANCE
The Travel Cooler/Warmer is ruggedly constructed to provide years of
dependable service.
- After each use, clean the unit, inside and out, with a soft cloth and mild soap
solution.
- Do not scrape, scratch, or puncture the surface of the cooler with sharp objects
or abrasives.
- Dry the unit properly, and store in a cool, dry place.
- Always make sure the power cord is disconnected from the unit before storing.
- Never allow the cooler/warmer to be immersed in liquid.
6
Advertisement
Table of Contents
