Table of Contents
Advertisement
Maintenance
Desktop Charger
The Desktop Charger is used for charging your handset. The tilted design facilitates the use of
handsfree operation. The charger is delivered with a plug-in power supply and is connected
into a wall socket.
Desktop Charger should only be connected to power adapters supplied by the manufacture.
Charging Rack
Figure 7: Wall mounted Charging Rack with power supply
The Charging Rack is used for charging your handset and/or spare batteries. When charging
spare batteries an adapter is needed. The wall mounted Charging Rack and its power supply
provide a modular system that enables a number of installation configurations. Each power
supply can support several charging racks with four positions for handsets and/or batteries in
each rack (see Data Sheet Charging Rack TD 92382GB).
As the handset cannot distinguish between a Desktop Charger and Charging Rack, it is
recommended that the alert signal is silenced when placed in a rack. It can be set in the "In
charger" mode, see "Change Mode Settings" on page 23. There is also a SIM parameter that
can be set in the SIM Card Programmer by your system administrator.
Figure 5.
Figure 6.
Maintenance
43
Advertisement
Table of Contents
