Bypassing A Traffic Jam During Navigation - Blaupunkt TravelPilot DX-R52 Operating Instructions Manual

Note: For this reason try, if possible, to insert the navigation CD whilst
still on the motorway so that this orientation process is speeded up.

Bypassing a traffic jam during navigation

Alongside the ability to automatically bypass traffic jams with the aid of the dynam-
ic navigation feature, the TravelPilot also gives you the option of manually entering
traffic jams or blocked sections of road during an active navigation session.
To bypass a traffic jam, proceed as follows:
button =.
1 Press the
The traffic jam menu is displayed containing the settings for the end of
the traffic jam.
: button to set the distance to the end of the traffic jam
2 Press the or
relative to your current position.
button :.
3 Press the
The traffic jam menu is displayed containing the settings for the start of
the traffic jam.
: button to set the distance to the start of the traffic
4 Press the or
jam relative to your current position.
Press the OK button ;.
5
The system returns to navigation mode and the route is recalculated.
Cancelling the traffic jam bypass feature
1 Whilst the manual traffic jam bypass is active, press the
A message will appear in the display asking you whether you want to
cancel the traffic jam bypass.
If you want to cancel the traffic jam bypass, press the OK button ;.
2
The navigation menu opens again and the route is recalculated.
INTRODUCTION NAVIGATION
button =.
RADIO MODE CD MODE
FM 1 EUROPE
TRAFFIC JAM...
END
T M C
5. 1 mi
FM 1 EUROPE
TRAFFIC JAM...
START
T M C
0. 1 mi
FM 1 EUROPE
TRAFFIC JAM...
T M C
CANCEL?
CD CHANGER
NAV
NAV
NAV
199
SETUP