Table of Contents
Advertisement
72 electrolux
Clean the oven door glass with warm water and a
soft
cloth only. Never use harsh abrasives as they
could damage the special heat-resistant surface of
the inner glasses.
Once the cleaning is carried out, refit the oven door,
following the procedure in reverse.
The two glasses in the middle are special glasses
that have been treated to resist heat. They are
marked with a small dot located on a corner and a
black frame respectively (Fig. 30).
It is important that, when refitting the oven door, the
inner glasses are fixed in the right position.
To check if this operation has been carried out
correctly, when inserting the glass, make sure that
the surface of the glass marked with a black frame
looks upwards and that the dot is located on the
upper right corner of the glass (see Fig. 30).
DO NOT clean the oven door while the
glass panels are warm. If this precaution
is not observed the glass panels may
shatter.
If the door glass panels become chipped
or have deep scratches, the glasses will
be weakened and must be replaced to
prevent the possibility of the panel
shattering. Contact your local Service
Force Centre who will be pleased to advise
further.
72
Fig. 26
Fig. 27
Fig. 28
Advertisement
Table of Contents
