Philips Comfort HR1821 Instructions Manual page 9

C
0
1
C
C
C
2 Switch the appliance on by pressing the on/off button.
This appliance will only function if all parts have been properly
mounted and the lid has been properly locked in place with the
latches.
3 Put the pre-cut pieces of ingredients into the feed tube and
gently press them towards the rotating sieve with the pusher.
Do not exert too much pressure on the pusher; this could affect the
quality of the end result and it could even cause the sieve to come to a
halt.
Never insert your fingers or an object into the feed tube.
After you have processed all ingredients and the flow of juice into the
juice cup or glass has stopped, switch the appliance off and wait until
the sieve has stopped rotating.
Do not let the appliance run for more than two minutes without
interruption. If you have not finished extracting juice, switch the
appliance off and allow it to cool down for two minutes before you
continue.
4 (Type HR1821 only) The integrated foam separator in the juice
cup lid will enable you to pour a nice cup of fresh juice without
a layer of foam on top.
Cleaning
The appliance is easier to clean if you do so immediately after use.
Do not use abrasive cleaning agents, scourers, acetone, alcohol etc.
Do not clean any of the parts in a dishwasher.
1 Switch the appliance off, remove the plug from the wall socket
and wait until the sieve has stopped rotating.
2 Remove the dirty parts from the motor unit, clean them with a
soft brush in soapy water and rinse them under a tap.
3 Clean the motor unit with a damp cloth.
Never immerse the motor unit in water nor rinse it under the tap.
ENGLISH
9