Table of Contents
Advertisement
Control with HDMI (HDAVI Control
What is HDAVI Control?
HDAVI Control is a convenient function that offers linked operations of this unit, and a Panasonic TV (VIERA) or DVD recorder
(DIGA) under HDAVI Control. You can use this function by connecting the equipment with the HDMI cable. See the operating
instructions for connected equipment for operational details.
1 Connect the unit to a Panasonic TV
(VIERA) and DVD recorder (DIGA) under
HDAVI Control using the HDMI cable.
(It is recommended that you use Panasonic's
HDMI cable. Non-HDMI-compliant cables
cannot be utilized.)
2 Make settings in the menu for the TV
(VIERA) to activate linked HDAVI Control
operations.
3 Perform the following steps to make sure
the unit accurately identifies connected
equipment.
1) Turn all equipment on.
2) Switch the TV (VIERA) off and then put it
back on.
3) Switch the unit's input to "DVR " and make
sure the TV (VIERA) correctly shows
pictures.
(Take these steps after changing connections
or settings.)
.
CH
VOLUME
DIRECT
0
TUNING
DISC
-/- -
SKIP
SLOW/SEARCH
STOP
PAUSE
PLAY
DRIVE SELECT
MANUAL SKIP
ENTER
Note
• Only this unit turns off when you shut it down. Other connected equipment compatible with HDAVI Control stay on.
• Audio output automatically switches to speakers on your TV (VIERA) when you turn the unit off.
Audio output from the DVD recorder (DIGA) switches from speakers on the TV (VIERA) to speakers connected to the unit when you
turn the unit on.
• This unit goes from off to on, and speakers connected to this unit start making audio output when you set the TV (VIERA) to output
sounds from the unit.
• This unit automatically goes off when you switch your TV (VIERA) off. (This operation is unavailable when you set the input source as
"TUNER " or "CD " on this unit.)
• (For Australia and New Zealand) Only this unit turns off when you shut it down. Other connected equipment compatible with HDAVI
Control stay on.
• The input for the unit switches automatically to "DVR " when a source is played back on the DVD recorder.
• When pictures arrive after sounds, select "ON " in "Adjusting audio timing to video timing" (á page 36).
• To set the unit against HDAVI Control, see page 35.
Enjoying sounds from the TV
The input source for the unit switches to "TV/STB " when you select a TV channel or operate the TV in other ways (á page 41).
DVD recorder
(DIGA)
OUT
OUT
TV MONITOR
Enjoying the Home Theater through one-touch operations
Aim the remote control at the DVD recorder (DIGA) and press
The following operations are automatically performed when you just press [ONE TOUCH PLAY].
1 The DVD recorder goes on and starts playing back the recorded media in the selected drive (e.g.
HDD, DVD).
2 The TV goes on and the TV input changes.
3 Surround playback starts after the unit is turned on and the input source for the unit switches to
"DVR ".
To adjust the volume: Press
You can also adjust the volume on your TV (VIERA)'s remote control.
(A message informing the action appears on your TV while you adjust the volume.)
• Press [u SKIP] to start playing a DVD disc or a recorded TV program again when playback does
not start from the beginning.
HDMI
(AV OUT)
Rear panel
(BD/DVD PLAYER) IN
(DVD RECORDER) IN
S VIDEO
VIDEO
IN
IN
IN
IN
IN
IN
BD/
OUT
BD/
DVD PLAYER
DVD RECORDER
TV/STB
TV MONITOR
DVD PLAYER
DVD RECORDER
VCR
TV/STB
CENTER
L
R
IN
SUBWOOFER SURROUND
FRONT
IN
IN
CD
BD/DVD/
DVD 6CH IN
DVD RECORDER
VCR
TV/STB
AUDIO
You need a stereo phono cable for enjoying
TV with surround sound.
VOLUME
TV (VIERA)
HDMI
IN
(AV IN)
A OR B
(L)
(R)
IN
OUT
SUBWOOFER
™
)
AUDIO
OUT
13
RQT8743
Advertisement
Table of Contents
