Inserting The Microsd Card; Recording A Video Manually - Brookstone DV MicroCam User Manual

inserTing The microsd card

1 . Insert the included microSD card into the video camera as depicted under
the card slot . Press the card all the way in until you hear a click and the
card is held securely .
2 . To remove the microSD card, press it in until you hear a click and the card
ejects enough for you to grasp and pull it from the video camera .

recording a video manually

1 . Make sure the VOX switch is in the OFF position .
2 . Slide the POWER switch to ON and press the RECORD button .
The red indicator light will blink once and the green indicator light
will blink slowly, indicating the video camera is recording .
3 . To stop filming, press the RECORD button again . The green indicator
light will stop blinking and the red indicator light will stay on continuously .
Your video will be saved as an AVI format file for you to download to your PC .
note: you must press the record button to stop recording. if you slide
the power switch to oFF while recording, the file will not be saved.
if at any time the video camera does not react when the power switch
is pressed, the device needs to be recharged.
4 . Slide the POWER switch to the OFF position to shut off the video camera .
6