Charging The Battery; Checking The Battery; Mounting The Video Camera - Brookstone DV MicroCam User Manual

oPeRaTIon

charging The baTTery

1 . Plug the USB cable (included) into the USB port on the video camera,
and then into a USB 2 . 0 port on your computer .
2 . The red indicator light will blink while the internal rechargeable battery
is charging . Charging time is approximately 2 hours .
3 . The red indicator light will remain lit and not blink when the battery is fully charged .

checking The baTTery

Slide the POWER switch to ON and press the RECORDING button for 4 seconds .
The red indicator light will blink between 1 and 4 times . 1 time means the battery is
at near-full capacity and 4 times means the battery is nearly extinguished . If the red
indicator light blinks rapidly and the entire unit shuts off, the battery is drained and
you need to recharge .

mounTing The video camera

1 . The video camera can be used by holding it in your hand, or mounting
it to a secure point for filming .
2 .
Use the CLIP BRACKET to hold the video camera and clip it securely to
anything . The CLIP BRACKET allows the camera to twist in a 180˚ circle
and capture virtually any angle .
3 . Use the MULTI BRACKET in conjunction with the CLIP BRACKET to capture
video at any angle . Secure MULTI BRACKET with magnet or mount with screws .
5