Table of Contents
Advertisement
Control panel
1 Programme chart
2 ON/OFF button
Depress this button to start the programme.
Depress it again to stop the programme or to
switch the machine off.
Before selecting or changing an ongoing
programme the machine must be switched off.
3 Spin reduction button
By depressing this button the spin speed is
reduced from 950 to 500 rpm for cotton
programmes and from 550 to 400 rpm for gentle
programmes.
4 Intensive Rinse Button
By depressing this button on cotton programmes
the machine will perform the rinses with more
water.
This option is recommended for people who are
allergic to detergents and in areas where the
water is very soft.
5 Half load button
Select this button to reduce water consumption
on the rinse cycle when washing a half load of
cottons or linens.
USE
6 Rinse hold button
Press this button to make the machine stop with
water in the drum after the synthetic or delicate
wash cycles.
This prevents any creasing which may take
place if the clothes are left damp in the drum.
When it is convenient for you to empty the
machine, simply press this button again so that
the machine can proceed to drain and spin, or
turn the dial to the drain programme "P".
If the button has not been depressed, the
programme will end with a short spin.
7 Door opening button
Depress it to open the door.
8 Temperature selector dial
Turn this dial to select the washing temperature.
Position
= cold wash.
9 Operating pilot light
This light is on whilst the machine is operating
(
button depressed) and goes out at the end
of the programme.
10 Programme selector dial
To select the required programme, turn this dial
clockwise until the programme letter is exactly
opposite the pointer.
9
Advertisement
Table of Contents
