Related Manuals for Zibro SRE 179 E
Summary of Contents for Zibro SRE 179 E
- Page 1 SRE 179 E MANUEL D'UTILISATION GEBRAUCHSANWEISUNG BRUGSANVISNING INSTRUCCIONES DE USO KÄYTTÖOHJE OPERATING MANUAL > ISTRUZIONI D’USO BRUKSANVISNING GEBRUIKSAANWIJZING BRUKSANVISNING...
- Page 2 PAGE PLIANTE FALTBLATT FOLDEUDSIDE HOJA DESPLEGABLE AUKI TAITETTU SIVU FOLD-OUT PAGE > PIEGHEVOLE UTBRETTSIDE UITVOUWBLAD UTVIKNINGSSIDA...
- Page 3 Dear Sir, Madam, Congratulations with your purchase of the Zibro, the number one brand among movable heaters. You have purchased a first-class quality product, which will serve you for many years to come. This, of course, provided you use the heater correctly.
-
Page 4: General Directions For Use
GENERAL DIRECTIONS FOR USE MAIN COMPONENTS Below you will find the main steps to be taken for using your Zibro. For more details, please refer to the Front plate MANUAL (pages 53 ff.). Grid Base plate Remove all packaging materials (Fig. A). -
Page 5: What You Need To Know In Advance
Note: To avoid unexpected shut off, we recommend to put a door or window ajar when the heater is operating. For each Zibro model the minimum size of space is specified in which you can use the heater safely, without additional ventilation (refer to Section P). If a particular... -
Page 6: Installing The Heater
MANUAL INSTALLING THE HEATER Carefully remove your Zibro from the box and check the contents. In addition to the heater you also need to have: a manual fuel pump a transportation cap these directions for use Keep the box and the packaging materials (Fig. A) for storage and/or transportation. -
Page 7: Setting The Clock
Let the remaining fuel in the pump flow back into the jerrycan and carefully remove the pump. Carefully screw the fuel cap back on the tank. Clean off any spilled fuel. Check whether the fuel cap is straight and tightened properly. Reinstall the removable tank in the heater (cap down). -
Page 8: Switching Off The Heater
Press the button and then the TIMER key immediately after that. The TIMER light and the information display will start blinking. Use the adjustment keys to set the time at which the heater must ignite. H: The TIMER indicator Use the key ( hour) to set the hours and the key ( min.) to set the minutes light indicates that the... -
Page 9: Automatic Deactivation
- 1 1 Too little ventilation. Ventilate better. Always contact your Zibro dealer for any malfunctioning not listed above. AUTOMATIC DEACTIVATION This heater is fitted with a safety system that ensures that it switches off automatically after 69 hours continuous operation. The following will then appear in the display: . -
Page 10: Maintenance
MAINTENANCE Switch off the heater and let it cool down, before you start any maintenance work. Also disconnect the plug from the mains. Your Zibro needs hardly any maintenance. It is, however, important that you clean the air filter and the vent... -
Page 11: Specifications
STORAGE (END OF THE HEATING SEASON) At the end of the heating season, you must store the heater in a dust-free place, if possible in its original packaging. Unused fuel cannot be used in the next heating season. We therefore recommend that you burn up all fuel. If there is still some fuel left, do not throw it away, but dispose of it in accordance with the local regulations for the disposal of domestic chemical waste. -
Page 12: Warranty Provisions
WARRANTY PROVISIONS Your heater comes with a 48-month warranty starting on the date of purchase. Within this period all defects in material or workmanship will be repaired without any charge. The following provisions shall apply regarding this warranty: We expressly dismiss all other claims for damages, including consequential damages. - Page 14 +39 571 628 500 tel: +32 3 326 39 39 fax: +39 571 628 504 fax: +32 3 326 26 39 email: pvgitaly@zibro.it email: pvgbelgium@zibro.com u NORGE q SCHWEIZ Appliance A/S PVG Schweiz AG Gefionsvej 7 Salinenstrasse 63 DK-3400 HILLERØD...