Page 3
Dear Sir, Madam, Congratulations with your purchase of the Zibro, the number one brand among movable heaters. You have purchased a first-class quality product, which will serve you for many years to come. This, of course, provided you use the heater correctly.
MAIN COMPONENTS GENERAL DIRECTIONS FOR USE Front plate Below you will find the main steps to be taken for using your Zibro. For more details, please refer to the Grid MANUAL (pages 45 ff.). Base plate Lid for removable Remove all packaging materials (Fig. A).
Your Zibro heater has been designed for use with high-quality water-free pure correct fuel will ensure safe, efficient, and paraffin oil, such as Zibro Extra or Zibro Kristal. Only fuels of this kind will ensure comfortable use of your clean and proper burning. Lower quality fuel may result in: Zibro.
MANUAL INSTALLING THE HEATER Carefully remove your Zibro from the box and check the contents. In addition to the heater you also need to have: a manual fuel pump a transportation cap a fuel cap cover these directions for use Keep the box and the packaging materials (Fig.
Check the removable tank fuel gauge while filling the tank (Fig. E). Stop filling by loosening the switch button on top of the pump (turn anti-clock- wise), once the gauge indicates that the tank is full. Never overfill the tank, especially not when the fuel is very cold (fuel expands when it heats up).
If you would like more extensive timer possibilities, we advise you to procure the Zibro weektimer. This timer is easy to connect with your Zibro Heater, see SWITCHING OFF THE HEATER There are two ways to switch off the heater.
Ventilate better. (& blinking VENT-light) Always contact your Zibro dealer for any malfunctioning not listed above. AUTOMATIC DEACTIVATION This heater is fitted with a safety system that ensures that it switches off automatically after 65 hours continuous operation. The following will then appear in the display: .
Switch off the heater and let it cool down, before you start any maintenance work. Also disconnect the plug from the mains. Your Zibro needs hardly any maintenance. It is, however, important that you clean the air filter cap and the vent filter with a vacuum cleaner and the grid with a damp cloth, both on a weekly basis.
We recommend that you remove dust and stains in time with a damp cloth, becau- se otherwise these may cause stains that are hard to remove. Do not remove any heater components yourself. Always contact your Zibro dealer for repairs. When the power cord is damaged, it may only be replaced by an authorised fitter.
We expressly dismiss all other claims for damages, including consequential damages. Any repairs or replacements of components within the term of warranty will not result in an extension of the term of warranty. The warranty shall no longer apply, when the heater has been modified, non-original parts have been used, or when it is repaired by third parties.
Page 14
Holloway Bank, Wednesbury tel: +43 7434 44867 West Midlands WS10 OAW fax: +43 7434 44868 tel.: +44 121 506 1818 email: pvgaustria@zibro.com fax: +44 121 505 1744 email: gases@lister.co.uk e BELGIË PVG Belgium NV/SA > ITALIA Industrielaan 55 PVG Italy SRL 2900 SCHOTEN Via Niccolò...