Page 3
Dear Sir, Madam, Congratulations with your purchase of the Zibro, the number one brand among movable heaters. You have purchased a first-class quality product, which will serve you for many years to come. This, of course, provided you use the heater correctly.
GENERAL DIRECTIONS FOR USE MAIN COMPONENTS Below you will find the main steps to be taken for using your Zibro. For more details, please refer to the Front plate MANUAL (pages 45 ff.). Grid Base plate Remove all packaging materials (Fig. A).
Note: To avoid unexpected shut off, we recommend to put a door or window ajar when the heater is operating. For each Zibro model the minimum size of space is specified in which you can use the heater safely, without additional ventilation (refer to Section P). If a particular...
MANUAL INSTALLING THE HEATER Carefully remove your Zibro from the box and check the contents. In addition to the heater you also need to have: a manual fuel pump a transportation cap these directions for use Keep the box and the packaging materials (Fig. A) for storage and/or transportation.
Check the removable tank fuel gauge while filling the tank (Fig. D). Stop filling by loosening the switch button on top of the pump (turn anti-clock- wise), once the gauge indicates that the tank is full. Never overfill the tank, especially not when the fuel is very cold (fuel expands when it heats up).
the temperature to a higher setting and the key on the left ( hour) to lower the temperature. Press once to increase the value one step. After approximately 10 seconds the light will stop blinking and the setting will be locked (Fig. F). The available temperature settings range from 6°C minimum to 28°C maximum.
Page 9
VENT-light) e - 1 1 Too little ventilation. Ventilate better. (& blinking VENT-light) timer save vent. fuel Always contact your Zibro dealer for any malfunctioning not listed above. save hour min. extension AUTOMATIC DEACTIVATION room This heater is fitted with a safety system that ensures that it switches off automatically after 49 hours continuous operation.
Switch off the heater and let it cool down, before you start any maintenance work. Also disconnect the plug from the mains. Your Zibro needs hardly any maintenance. It is, however, important that you clean the air filter and the vent filter...
We recommend that you remove dust and stains in time with a damp cloth, because otherwise these may cause stains that are hard to remove. Do not remove any heater components yourself. Always contact your Zibro dealer for repairs. When the power cord is damaged, it may only be replaced by an authorised fitter.
WARRANTY PROVISIONS Your heater comes with a 24-month warranty starting on the date of purchase. Within this period all defects in material or workmanship will be repaired without any charge. The following provisions shall apply regarding this warranty: We expressly dismiss all other claims for damages, including consequential damages.
Page 13
key-lock timer save hour min. extension timer save vent. fuel temp. clock room...