Laundry Is Not Spun Enough - Zanussi F855G Installation And Instruction Manual

Problem
• Spinning starts late or the

laundry is not spun enough:

If you are unable to identify or solve the problem,
contact our service centre. Before telephoning, make
a note of the model, serial number and purchase
date of your machine: the Service Centre will require
this information.
Possible cause
• The electronic unbalance detection device has cut
in because the laundry is not evenly distributed in
the drum. The laundry is redistributed by reverse
rotation of the drum. This may happen several
times before the unbalance disappears and normal
spinning can resume. If, after 20 minutes, the
laundry is still not evenly distributed in the drum,
the machine wil not spin. If at the end of the
programme the laundry is not spun enough,
redistribute the load manually and select the spin
programme.
19