Timer - Philips FW 306 Instructions For Use Manual

TIMER

OPTIMAL JAZZ
DSC DBB
REPEAT SHUFFLE
PROGRAM TIMER
TECHNO ROCK
FW 318C
DIGITAL SOUND CONTROL
CD
STANDBY . ON
DUBBING
TUNING
DUBBING
HIGH SPEED
DUBBING
NORMA• HIGH RECORD REPLAY
SEARCH
Timer Setting
• The system can switch on to CD or TUNER mode
automatically at a preset time. It can serve as an
alarm to wake you up. After half an hour from the
preset time, the system will return to the standby
mode if no button is pressed.
• Before setting the timer, make sure the clock is set
correctly.
• The timer has to be reset or start again for each
subsequent preset time.
• The volume of the timer will be at the last setting
before the set is switched to standby mode.
20
pg 01-22/FW326/22-Eng 20
RDS
STEREO REC DBB
I S
NEWS HSD
REPLAY FM MW LW AM PM CLOCK
MAX
TIMER PROGRAM
MINI HIFI SYSTEM
VOLUME
TUNER TAPE AUX
BAND TAPE 1 • TAPE 2 VIDEO
CLEAR PRESET
PAUSE PREV NEXT
STOP PLAY
1 Press and hold CLOCK•TIMER for more than 2
seconds to select timer mode.
™ "ON 00:00" or the last set timer starts flashing.
The TIMER flag flashes.
™ The last selected source is lighted while other
available sources are flashing.
™ "à , á , í , ë, Ç" light up (for models
FW325 and FW326 only).
2 Press CD or TUNER to select the desired source.
3 Press à or á to set the hour for the timer to start.
4 Press í or ë to set the minute for the timer to
start.
5 Press CLOCK•TIMER to store the start time.
™ The TIMER is now set.
™ The TIMER flag remains on the display.
• To exit without storing the setting, press STOP Ç.
• At the preset time, the TIMER will be activated.
™ The selected source will be played.
™ The TIMER flag disappears from the display.
Notes:
– During timer setting, if no button is pressed within 90
seconds, the system will exit timer setting mode
automatically.
– If the source selected is TUNER, the last tuned
frequency will be switched on.
– If the source selected is CD, the first track of the disc
will be played. If the CD tray is empty, the TUNER
source will be selected instead.
n
To cancel the TIMER
MIC LEVEL
1 Press CLOCK•TIMER for more than 2 seconds.
2 Press PAUSE Å to cancel the timer.
• MAX
™ "CANCEL" will be displayed.
™ The TIMER flag disappears from the display.
To start the TIMER again (for the same time)
1 Press CLOCK•TIMER for more than 2 seconds.
2 Press CLOCK•TIMER again to store the start time
and the selected source.
12/9/98, 15:54
3139 116 17531