Use; Control Panel; Controls - Zanussi F1000 Instruction Booklet

Washing machine f1000
Table of Contents

Advertisement

Use

Control panel

CY LE
1 Mains-on light
This light comes on when the ON/OFF button is
pressed, and goes out when it is pressed again.
2 ON/OFF button
Press this button to switch the machine on after
selecting the programme and the different options.
Press it again to switch the machine off.
3 SPIN REDUCTION button
By depressing this button the spin speed is reduced
as follows:
cotton and linen: from 1000 to 650 r.p.m.
programme SHORT SPIN: from 650 to 450 r.p.m.
4 QUICK WASH button
By depressing this button on cotton programmes
(PREWASH 30° - 95° and COTTONS 30° - 95°) and
synthetic programmes (PREWASH 30° - 60° and
SYNTHETICS 30° - 60°) the washing time will be
reduced by approx. 30 mins for cotton and by 15
mins for synthetics.
Max. recommended temperature 60°C.
To be used for lightly soiled laundry.
PLUS
8
5 EXTRA RINSE button
By depressing this button on programmes
(COTTONS WITH PREWASH 30°- 95° and
COTTONS 30° - 95°) for cotton and linen the
machine will perform 4 rinses instead of 3.
To be used in areas where the water is very soft or
for people allergic to detergents or who have very
delicate skin.
6 HALF LOAD button
Select this button to reduce water consumption on
the rinse cycle when washing a half load of cottons
or linens.
7 Temperature selector dial
Turn this dial to select the washing temperature.
Position COLD corresponds to a cold wash.
8 Programme selector dial
To select the required programme, turn this dial
clockwise until the pointer on the knob coincides
with the programme desired.
Before selecting a programme or changing a
programme in progress the machine must be
switched off by depressing ON/OFF button.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aquacycle 1000

Table of Contents