Olivetti Olibook P1500 User Manual page 91

6. The RAM module will
8
7. Pull the latches to release the second module if necessary.
8. Insert a new module holding it at about a 30° angle and fit the connectors firmly into
the memory slot.
9. The module's pin alignment will allow it to only fit one way. Make sure the module is
seated as far into the slot as it will go. DO NOT FORCE the module; it should fit
without much pressure.
10. Press the module in and down towards the mainboard until the slot levers click into
place to secure the module.
pop-up, and you can remove it.
8
Upgrading The Computer
Upgrading the System Memory (RAM) 6 - 11
Figure 6 - 8
RAM Module
Removal
6