Failing The Post - Olivetti Olibook P1500 User Manual

BIOS Utilities

Failing the POST

Errors can be detected during the POST. There are two categories, "fatal" and
"non-fatal".
Fatal Errors
These stop the boot process and usually indicate there is something seriously
wrong with your system. Take the computer to your service representative or
authorized service center as soon as possible.
5
Non-Fatal Errors
This kind of error still allows you to boot. You will get a message identifying the
problem (make a note of this message!) followed by the prompt:
• Press <F1> to resume
• <F2> to enter Setup
Press F1 to see if the boot process can continue. It may work, without the cor-
rect configuration.
Press F2 to run the Setup program and try to correct the problem. If you still
get an error message after you change the setting, or if the "cure" seems even
worse, call for help.
The Power-On Self Test (POST) 5 - 3