Powering Off The Projector - ViewSonic J658D User Manual

Powering Off the Projector:

1. Press button to turn off the projector lamp. You wll see a message "Press Power
Button to Turn Off Projector. Projector must cool down for 90 seconds before
unpluggng or restartng." appear on the screen.
2. Press button again to confirm.
3. The coolng fans contnue to operate for coolng
cycle and the Lamp LED goes out.
When the Power LED begins flashing, the projector
has entered standby mode.
If you wsh to turn the projector back on, you must
wat untl the projector has completed the coolng
cycle and has entered standby mode. Once n
standby mode, smply press
the projector.
4. Turn off the man power swtch.
5. Dsconnect the power cord from the electrcal
outlet and the projector.
6. Do not turn on the projector mmedately
followng a power off procedure.
Please wait until the fan motor and the Lamp LED turn off before removing
the AC power cord from the projector.
17
button to restart
ViewSonic PJ658D