Ambient Light Measurement; Mode Selection; Measurement Of Ev (Exposure Value) - Sekonic FLASHMATE L-308BII Operating Instructions Manual

6. Ambient Light Measurement

6.1 Mode Selection

measurement mode.
displayed (Fig. 17).
NOTES
In the ambient light measurement mode, light measurement is continuously
l
conducted while the measuring button is kept depressed.
If you changed the film speed (ISO) or the shutter speed (T) value after
l
measurement, the measurement value is automatically recalculated and displayed
again.
E.u (underexposure error) or E.o (overexposure error) is displayed if the metering
l
range is exceeded. If E.u was displayed, reduce the shutter speed; if E.o was
displayed, increase it. (Fig. 18) (Fig. 19)

6.2 Measurement of EV (Exposure Value)

Press the mode selector to enter the EV measurement
mode. Press the measuring button, and the EV value is
displayed (Fig. 20).
NOTE
"EV" represents a specific amount of light, and is a combination of a shutter speed
l
and an aperture value.
7
Fig. 18
Fia. 17
Fig. 19
Fig. 20