Measurement In Ambient Light Mode - Sekonic SPECTROMASTER C-800 Operating Manual

5-2

Measurement in Ambient Light Mode

Select Ambient Light Mode when taking measurements of natural light (sunlight),
and continuous light sources such as LED, tungsten lamps and fluorescent lights.
WARNING
Do not look directly into sunlight or other strong light when measuring. It
may cause severe eye damage or even loss of vision.
Operation
1.
On the Measurement screen, touch the [Measuring Mode] icon
and select the [Ambient Light Mode] icon on the Measuring Mode
Selection screen.
Select the measuring mode. ( P22)
Measuring Screen
5. Measuring Light Sources [Measurement Screen]
Measuring Mode
Selection Screen
85
Measuring Screen