Disposal; Tips For Environmental Protection - Zanussi TCE7125 User Manual

Disposal

Packaging
materials
The materials marked with the symbol
are recyclable.
This means that they can be recycled by
disposing of them properly in appropriate
collection containers.
Check with your local Council or
•
Environmental Health Office to see if there
are facilities in your area for re-cycling this
appliance.
When the appliance is to be scrapped, cut
•
off the power supply cable and make the
door closing device unusable to prevent
young children from being trapped inside.

Tips for environmental protection

To save energy and to help protect the
environment, we recommend that you
follow these hints:
• Try to load the maximum capacity of the
machine as small loads are
uneconomical.
• Always load well spun laundry. The higher
the spin speed, the lower the electricity
consumption and the shorter the drying
times.
• Do not over-dry laundry, this avoids
creasing and saves energy.
Select the drying time/section according
to the type of laundry and the required
degree of dryness.
• To utilize the maximum load, laundry
which is to be dried ready to put away
Machine
Use authorised disposal sites for your old
appliance. Help to keep your country tidy!
Old appliance
The symbol on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it shall be handed over to the applicable
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will help
prevent potential negative consequences for
the environment and human health, which
could otherwise be caused by in appropriate
waste handling of this product. For more
detailed information about recycling of this
product, please contact your local city office,
your household waste disposal service or
the shop where you purchased the product.
(store dry) can be dried together with
items to be ironed. To do this, select the
time for iron-dry, remove the iron-dry
items at the end of the programme and
then finish-dry the rest of the load.
• Clean the filters regularly to avoid
excessive drying times and high electricity
consumption.
• Ventilate the room well. The room
temperature should not exceed +35°C
during drying.
5