Color Setting; Motion Setting; Osd Setting - Samsung SDE-120N User Manual

web viewer

Color setting

You can adjust all settings from 0 to 100 for each channel in fine tune mode, and the default is 50.
1. From the left menu tree, select <Camera>.
2. Click <Color>.
3. Make your changes as necessary in details.

For more information, refer to "COLOR". (Page 30)
4. Click <Ok>.
Your changes will be saved.

Motion setting

You can specify the motion detection area, and specify the use of the alarm output if a motion is detected.
If a detection area is specified, the system will detect a motion in that area if it occurs.
1. From the left menu tree, select <Camera>.
2. Click <Motion>.
3. Click a motion area and drag it up to a desired point. The
selected cells will turn in a different color, which will be
specified as a detection area.

For more information, refer to "MOTION SENSOR". (Page 31)
4. Click <Ok>.
Your changes will be saved.

OSD setting

You can change the display information.
1. From the left menu tree, select <Display>.
2. Click <OSD>.
3. Make your changes as necessary in details.

For more information, refer to "OSD". (Page 32)
4. Click <Ok>.
Your changes will be saved.
64_ web viewer
Lo-Call 1890 866 900 www.cctvireland.ie