Sound - Samsung SDE-120N User Manual

SOUND

You can configure the settings of AUDIO and BUZZER.
See the previous section to repeat steps 1~3. (Page 25)
AUDIO
You can select to input the live audio source and select an audio channel.
Using the mouse may help easy setup.
1. Use the direction buttons to move to the upper
<SOUND> icon and press the [ENTER] button.
The AUDIO setup screen appears.
2. Use direction buttons (▲▼◄►) to move to a desired
item, and press the [ENTER] button to set the value.
•
LIVE AUDIO: Turn on or off the audio output.
However, the channel that is set to COVERT does not
output sound. (Page 30)
•
DEFAULT AUDIO CHANNEL: Select an audio channel
to monitor among voice signals incoming from audio
ports 1 through 4.
3. When your settings are completed, press the <APPLY>
button on the bottom.
Your settings will be applied.
4. Press the <CLOSE> button to display the confirmation dialog and return to the previous menu.
BUZZER
You can use the remote control to activate the buzzer.
Using the mouse may help easy setup.
1. Use the direction buttons to move to <BUZZER> in the
left corner of the SOUND setup screen and press the
[ENTER] button.
2. Use direction buttons (▲▼◄►) to move to <REMOTE
CONTROLLER> and press the [ENTER] button to set the
value.
3. When your settings are completed, press the <APPLY>
button on the bottom.
Your settings will be applied.
4. Press the <CLOSE> button to display the confirmation
dialog and return to the previous menu.
Lo-Call 1890 866 900
SOUND
SOUND
AUDIO
LIVE AUDIO
DEFAULT AUDIO CHANNEL
BUZZER
CANCEL APPLY
SOUND
AUDIO
REMOTE CONTROLLER
BUZZER
CANCEL APPLY
www.cctvireland.ie
ON
CH1
CLOSE
OFF
CLOSE
English _35