Add Ringing Tones For Contacts; Create Contact Groups - Nokia N95 User Manual

When you use Fixed dialling, packet data connections are
not possible, except when sending text messages over a
packet data connection. In this case, the message center
number and the recipient's phone number must be
included on the fixed dialling list.
When fixed dialling is activated, calls may be possible to
the official emergency number programmed into your
device.

Add ringing tones for contacts

To define a ringing tone for a contact or a contact group,
do the following:
1
Press to open a contact card or go to the groups list,
and select a contact group.
2
Select Options > Ringing
opens.
3
Select the ringing tone you want to use for the
individual contact or the selected group. You can also
use a video clip as a ringing tone.
When a contact or group member calls you, the device
plays the chosen ringing tone (if the caller's telephone
number is sent with the call and your device recognises it).
To remove the ringing tone, select
list of ringing tones.
tone. A list of ringing tones
Default tone from the

Create contact groups

1 In Contacts, press to open the groups list.
2
Select Options > New group.
3
Write a name for the group or use the default name
Group , and select OK.
4
Select the group, and Options
5 Scroll to a contact, and press
multiple members at a time, repeat this action on all
the contacts you want to add.
6
Select OK to add the contacts to the group.
To rename a group, select Options
new name, and select OK.
Remove members from a group
1
In the groups list, select the group you want to modify.
2
Scroll to the contact, and select
from group.
3 Select Yes to remove the contact from the group.
Copyright © 2007 Nokia. All rights reserved.
> Add members.
to mark it. To add
> Rename, enter the
Options > Remove
99