Nokia N95 User Manual page 93

device prevents you from sending messages that may not
be supported. To include content in your messages without
notifications, select Free.
Access point in use
the preferred connection.
Multimedia retrieval
messages. To receive messages automatically in your home
cellular network, select
home cellular network, you receive a notification that
there is a message to retrieve in the multimedia message
center.
Outside your home cellular network, sending and receiving
multimedia messages may cost you more.
If you select Multimedia retrieval
your device automatically makes an active packet data
connection to retrieve the message both in and outside
your home cellular network.
Allow anon. msgs.
messages from an anonymous sender.
Receive adverts — Define whether you want to receive
multimedia message advertisements.
Receive report — Select whether you want the status of
the sent message to be shown in the log (network service).
Deny report sending
your device sending delivery reports of received messages.
84 Copyright © 2007 Nokia. All rights reserved.
— Select which access point is used as
— Select how you want to receive
Auto in home netw.. Outside your
> Always automatic,
— Select whether you want to reject
— Select whether you want to deny
Message validity — Select how long the message center
resends your message if the first attempt fails (network
service). If the message cannot be sent within the validity
period, the message is deleted from the message center.
E-mail
Press , and select Messaging
E-mail.
To select which mailbox you want to use for sending
e-mail, select Mailbox in use
Select Mailboxes and a mailbox to change the following
settings: Connection settings,
settings, and Automatic retrieval.
To remove a mailbox and its messages from your device,
scroll to it, and press .
To create a new mailbox, select
Connection settings
To edit the settings for the e-mail you receive, select
Incoming e-mail and from the following:
User name — Enter your user name, given to you by your
service provider.
Password — Enter your password. If you leave this field
blank, you are prompted for the password when you try to
connect to your remote mailbox.
> Options > Settings >
and a mailbox.
User settings, Retrieval
Options > New mailbox.