Select The Temperature; Select The Programme; At The End Of The Programme - Zanussi T 1213 V Instruction Manual

6. Select the temperature

Choose the temperature which corresponds to the
chosen programme, with the help of the indica-
tions or the programme table, according to the
fibers and the fastness of the colours.
7. Select the spinning speed
Turn this knob to choose :
- a rinse hold " "
- a draining " "
- a spinning speed suiting best to the nature of your
laundry and to the degree of humidity wished at
the end of the wash according to the following
table :
Cotton 300 450
Sint/Wool
300 400
300
Delicates

8. Select the programme

Choose the programme according to the nature
and the degree of soil of the laundry.
Turn the programme selector clockwise to select
the chosen programme.
9. Starting of the programme
The on/off pushbutton " " enables to switch on
your machine. The control lamp lights on and the
programme begins.

10. At the end of the programme

When the selected programme is over, the ma-
chine stops automatically.
The programmes end :
by a spinning speed for all the programmes if
you choose a spinning speed.
by a draining for all the programmes if you
choose the draining position " " on the spinning
speed variator.
by a rinse hold for all the programmes if you
choose the rinse hold position " "on the spinning
speed variator.
You can finish these programmes by a spinning
(by choosing a spinning speed) or by a draining
(by choosing the draining position on the
spinning speed variator).
28
600 750 900 1050 1200
500 600 700 800
400 500
900
650
After each wash, depress the on/off pushbutton
" ". Press off the other pushbuttons if necessary,
unplug the machine from the wall socket ; turn off
the water tap.
After each wash cycle, we recommend that the lid
and drum are left open after use to air the drum
and prevent mould and stagnant smells forming.