Maintenance; Bodywork; Detergent Dispenser Drawer; Water Inlet Filter - Zanussi FLS 702 Instruction Booklet

Maintenance

Before any maintenance or cleaning is carried
out you must DISCONNECT the appliance
from the electricity supply.

1. Bodywork

Clean the outside of the machine with warm water and a
neutral, non-abrasive household detergent. Rinse with
clean water and dry with a soft cloth.
Important: do not use methylated spirits, solvents or
similar products to clean the bodywork.

2. Detergent dispenser drawer

After a while, detergents and fabric softeners leave
deposits in the drawer.
Clean the drawer from time to time by rinsing it under a
running tap. Remove the drawer by pressing the catch
downwards and by pulling it out.
To facilitate cleaning, the top part of the additive
compartments can be removed.
Detergent can also eventually accumulate inside the
drawer recess: clean it with an old toothbrush. Refit the
drawer after cleaning.

3. Water inlet filter

If you notice that the machine is taking longer to fill,
check that the filter in the water inlet hose is not
blocked.
Turn off the water tap.
Unscrew the water inlet hose at the rear of the
appliance.
Clean it with a stiff brush.
Refit the filter and screw the hose at the rear of the
appliance.
AL021
P0185
P0090
13
AL033
P0021