Clevo LP200C Service Manual
  1. Manuals
  2. Brands
  3. Clevo Manuals
  4. Desktop
  5. LP200C
  6. Service manual
Clevo LP200C Service Manual

Clevo LP200C Service Manual

Lcd pc
Hide thumbs Also See for LP200C:
Table of Contents

Advertisement

Quick Links

P
REFACE
Service Manual
LCD PC
LP200C/LP200T
I

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LP200C and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Clevo LP200C

Summary of Contents for Clevo LP200C

  • Page 1 REFACE Service Manual LCD PC LP200C/LP200T...

  • Page 2: Preface

    REFACE OTICE The company reserves the right to revise this publication or to change its contents without notice. Information con- tained herein is for reference only and does not constitute a commitment on the part of the manufacturer or any subsequent vendor.

  • Page 3: About This Manual

    REFACE BOUT ANUAL This manual is intended for service personnel who have completed sufficient training to undertake the maintenance and inspection of personal computers. It is organized to allow you to look up basic information for servicing and/or upgrading components of the LCD PC. The following information is included: Chapter 1, Introduction, provides general information about the location of system elements and their specifications.

  • Page 4: Table Of Contents

    REFACE Table of Contents REFACE Notice ......................................II Trademarks ....................................II About This Manual ..................................III Related Documents ................................. III Table of Contents ..................................IV 1. I NTRODUCTION Overview ..................................... 1-1 Systm Specifications .................................. 1-2 CPU ......................................1-2 Intel Celeron ..................................1-2 Intel Pentium III .................................
  • Page 5 REFACE Environmental Specifications..............................1-6 Temperature..................................1-6 Humidity (non-condensing) ..............................1-6 External Locator ..................................1-7 System Board Overview ................................1-11 Key Parts ....................................1-11 Cable Connectors, Switches & Jumpers .......................... 1-12 2. D ISASSEMBLY Overview ....................................2-1 Maintenance Tools ................................2-2 Connections ..................................
  • Page 6 REFACE Speaker Removal ..................................2-19 Base Assembly Removal ................................ 2-21 Power Supply Removal ................................2-23 USB Board Removal ................................2-26 Hard Disk Drive Removal ............................... 2-27 Fax/Modem Module & IEEE 1394 Module (Optional) ......................2-29 A. P PPENDIX ISTS B. S &...

  • Page 7: Introduction Overview

    NTRODUCTION VERVIEW This manual covers the information you need to service or upgrade both the LP200C and LP200T LCD PCs. The two models mainly differ in appearance. All the description in this manual applies to both models unless otherwise speci- fied.

  • Page 8: Systm Specifications

    1. I NTRODUCTION YSTM PECIFICATIONS NTEL ELERON Socket Type Socket 370 (PPGA) Speed 500/533/600/633MHz L1 cache (in CPU) 16KB code + 16KB data L2 cache (on die) 128KB NTEL ENTIUM Socket Type Socket 370 (FCPGA) Speed 600/650/700/750/800MHz L1 cache (in CPU) 16KB code + 16KB data L2 cache (on die) 256KB...

  • Page 9: Bios

    1. I NTRODUCTION BIOS Insyde 2Mb Flash ROM, APM 1.2, ACPI IDEO Controller built-in SiS630 Memory* SSMA Interface digital I/F Display built-in 15” LCD color TFT XGA (1024 x 768), 256K colors Port analog 15-pin VGA port for CRT *The system allocates or “shares” a portion of system memory for video use. “Shared memory size is user-configurable via the SCU.

  • Page 10: Audio

    TI 1420 Socket (x 2) Type II or (x 1) Type III Controller SMSC37N869 Ports (x 4) LP200C (x 2) LP200T Serial (x 1) 9-pin, 16550A compatible (x 1) infrared (modes: IrDA, ASK, FIR) Parallel (x 1) 25-pin (modes: Standard AT, Bidirectional, ECP, EPP)

  • Page 11: Input

    1. I NTRODUCTION NPUT Keyboard (dealer option) 104-key, AT-compatible, with special function keys OMMUNICATIONS ODEM Type MDC, V.90, 56K (software-based) Output RJ-11 jack (on-board) (* The modem module is a dealer option.) Type built-in SiS630 Output RJ-45 jack (on-board) ECURITY BIOS Password Kensington Lock Port OWER...

  • Page 12: Physical Specifications

    1. I NTRODUCTION HYSICAL PECIFICATIONS Dimensions W: 369mm (14.5”) L: 384mm (15.1”) D: 175mm (6.9”) Weight 7.9Kg/17.4lbs Panel Tilt to 15 Stand Swivel NVIRONMENTAL PECIFICATIONS EMPERATURE Operating C to 35 F to 95 Storage C to 65 C (14 F to 149 UMIDITY CONDENSING Operating...

  • Page 13: External Locator

    1. I NTRODUCTION XTERNAL OCATOR The following figures show the external locations of the main features of the LCD PC. LP200C LP200T RONT . 1 – 1 1. LCD 2. Speakers 3. FDD activity LED 4. CD-device activity 5. HDD activity LED 6.
  • Page 14 1. I NTRODUCTION . 1 - 2 1. PC Card (PCMCIA) socket 2. PC Card eject button 3. LCD brightness control 4. Microphone input jack 5. Line-in jack 6. Phones out jack 7. Volume control knob 8. HDD bay Left View 1 –...
  • Page 15 1. FDD bay 2. CD-Device bay 3. Emergency eject button - Use a probe (e.g. a straightened paper clip). 4. Eject button 5. Kensington lock port 6. AC-in port 7. two USB ports (* LP200C only) Right View 1 – 9...
  • Page 16 1. I NTRODUCTION . 1 - 4 1. Serial port (COM A) 2. Printer/Parallel port 3. VGA port 4. PS/2 mouse port 5. PS/2 keyboard port 6. USB ports (x2)) 7. IEEE1394 port 8. RJ-45 LAN port 9. RJ-11 Modem port Rear View 1 –...

  • Page 17: System Board Overview

    1. I NTRODUCTION YSTEM OARD VERVIEW ARTS Top View Bottom View ARTS . 1 - 5 1. CPU (Intel Pentium III or Celeron) with Fan 2. SMSC37N869 Super I/O Controller 3. Flash ROM 4. two DIMM Sockets 5. CMOS Battery 6.

  • Page 18: Cable Connectors, Switches & Jumpers

    1. I NTRODUCTION & & J ONNECTORS WITCHES ABLE ONNECTORS WITCHES UMPERS UMPERS . 1 - 6 1. CN1 (Inverter Cable) 2. CN2 (Power Cable) 3. CN4 (Power Cable) 4. CN6 (FDD Cable) 5. CN22 (CD Device Cable) 6. CN35 (USB Cable) 7.

  • Page 19: Disassembly

    VERVIEW This chapter provides step-by-step instructions for disassembling parts and subsystems. When it comes to reassem- bly, reverse the procedures (unless otherwise indicated). All the procedures apply to both the LP200C and LP200T unless otherwise specified. We suggest you completely review any procedure before you take the computer apart.

  • Page 20: Maintenance Tools

    2. D ISASSEMBLY AINTENANCE OOLS The following tools are recommended when working on the LCD PC: • M3 Philips-head screwdriver • M2.5 Philips-head screwdriver (magnetized)* • M2 Philips-head screwdriver • Small flat-head screwdriver • Pair of needle-nose pliers • Anti-static wrist-strap * note Maintenance Precaution #3.

  • Page 21: Maintenance Precautions

    2. D ISASSEMBLY AINTENANCE RECAUTIONS The following precautions are a reminder. To avoid personal injury or damage to the computer while performing a removal and/or replacement job, take the following precau- tions: Don't drop it. Perform your repairs and/or upgrades on a stable surface. If the computer falls, the case and other components could be damaged.

  • Page 22: Back Cover Removal

    OVER EMOVAL 1. Place the system with its LCD display facing down. 2. Remove 5 screws (A, , B, C, D & E) which secure the Back Cover to the rest of the system. EMOVING CREWS FROM THE BACK OF THE SYSTEM .

  • Page 23: Cpu Removal

    CPU R EMOVAL Part A Remove the Back Cover. (page 2-4) Part B FNote: If you want to upgrade the CPU, replace the old CPU with the upgraded one and also see the CPU Upgrade Notes on the next page. 1.

  • Page 24: Cpu Upgrade Notes

    2. D ISASSEMBLY CPU U PGRADE OTES After you install the upgraded CPU, check against the following table to see if you need to adjust switch settings. WITCH ETTINGS FOR UPPORTED Switch SW1 (CPU Frequency Switch) Type FSB Speed SW1-1 SW1-2 SW1-3 SW1-4...

  • Page 25: Memory Module Removal

    2. D ISASSEMBLY EMORY ODULE EMOVAL DIMM EMOVING Part A Remove the Back Cover. (page 2-4) DIMM Part B EMOVING THE . 2-5 Release the levers on the two ends of the DIMM slot. As you do so, the mod- ule will rise slightly and remove the seated DIMM, one at a time.

  • Page 26: Fdd Module Removal

    2. D ISASSEMBLY FDD M ODULE EMOVAL Part A Remove the Back Cover. (page 2-4) Part B 1. Remove 4 screws (A, B, C & D). 2. Separate the FDD module from the rest of the system by disconnecting the FDD Cable from the System Board at Connector CN6.

  • Page 27: Cd Device Module Removal

    2. D ISASSEMBLY CD D EVICE ODULE EMOVAL The CD device module can be the CD-ROM module, DVD module or CD-RW module. Part A Remove the Back Cover. (Page 2-4) Part B 1. Remove 4 screws (A, B, C & D). 2.

  • Page 28: Inverter Board Removal

    2. D ISASSEMBLY NVERTER OARD EMOVAL Part A Remove the Back Cover. (Page 2-4) Part B 1. Remove the Inverter Shielding Plate by removing 3 screws (A, B & C) which secure it to the rest of the system. (If you have already removed the FDD module, Screws A & B have already been removed during the process.) 2.

  • Page 29: I/O Bracket Removal

    2. D ISASSEMBLY I/O B RACKET EMOVAL Part A Remove the Back Cover. (page 2-4) Part B Remove the I/O Bracket by removing 10 screws (A ~ J) which secure it to the rest of the system. (If you have already removed the CD Device Module, Screw A has already been removed during the process.) I/O B EMOVING THE RACKET...

  • Page 30: System Board Removal

    2. D ISASSEMBLY YSTEM OARD EMOVAL Part A Remove the Back Cover. (page 2-4) Remove the I/O Bracket. (page 2-11) Part B 1. Remove Screw A. 2. Disconnect the following 12 cables and 2 ground wires from the System Board: 12 Cables (C1) The Inverter Board to System Board (from Connector CN1).
  • Page 31 2. D ISASSEMBLY FDD Module EMOVING THE YSTEM OARD . 2-13 CD Device CN22 CN35 Module CN32 CN31 CN33 CN34 CN30 System Board System Board Removal 2 – 13...

  • Page 32: Lcd Module Removal

    2. D ISASSEMBLY LCD M ODULE EMOVAL Part A Remove the Back Cover. (page 2-4) Remove the I/O Bracket. (page 2-11) Part B 1. Remove 6 screws (A, B, C, D, E & F). 2. Disconnect the following 8 cables and 3 ground wires. 8 Cables (C1 &...
  • Page 33 2. D ISASSEMBLY EMOVING CREWS & 3 G ABLES ROUND IRES . 2-14 CN32 CN33 CN34 CN31 LCD Module Removal 2 – 15...
  • Page 34 2. D ISASSEMBLY 3. Remove the LCD Module. A. Remove 4 screws (A, B, C & D) to separate the Front Panel from the rest of the system. B. Disconnect the Converter Cable from the LCD Module. Front Panel LCD M EMOVING THE ODULE .

  • Page 35: Inverter + Led Board Removal

    2. D ISASSEMBLY + LED B NVERTER OARD EMOVAL Part A Remove the Back Cover. (page 2-4) Remove the I/O Bracket. (page 2-11) Remove the Front Panel with the LCD Module. (Steps 1 & 2 of Part B of the LCD Module Removal Procedure, pages 2-14 & 2-15) Part B 1.

  • Page 36: Converter Board Removal

    2. D ISASSEMBLY ONVERTER OARD EMOVAL Part A Remove the LCD Module. (pages 2-14 ~ 2-16 ) Part B Separate the Converter Board from the rest of the system by removing Screw A. EMOVING THE ONVERTER OARD . 2-17 Converter Board Converter Board Removal 2 –...

  • Page 37: Speaker Removal

    2. D ISASSEMBLY PEAKER EMOVAL Part A Remove the Back Cover. (page 2-4) Remove the I/O Bracket. (page 2-11) Part B 1. Disconnect the following 4 cables. (C1) The Right Speaker to System Board (from Connector CN34). (C2) The Left Speaker to System Board (from Connector CN33). (C3) The LED + Inverter Board to System Board (LED cable from Connector CN31).
  • Page 38 2. D ISASSEMBLY 3. Separate the Front Panel from the rest of the system by removing 4 screws (A, B, C & D). 4. Separate the Speakers from the Front Panel by removing 8 screws (E ~ L). Front Panel EPARATING THE PEAKERS FROM THE...

  • Page 39: Base Assembly Removal

    2. D ISASSEMBLY SSEMBLY EMOVAL Part A Remove the Back Cover. (page 2-4) Remove the I/O Bracket. (page 2-11) Part B Separate the Base Assembly from the rest of the system. A. Disconnect the following 4 cables and 3 ground wires from the System Board. 4 Cables (C1 &...
  • Page 40 2. D ISASSEMBLY EPARATING THE SSEMBLY FROM THE YSTEM . 2-20 CN35 CN30 Base Assembly Removal 2 – 22...

  • Page 41: Power Supply Removal

    2. D ISASSEMBLY OWER UPPLY EMOVAL The Power Supply is in the Base Assembly. Part A Remove the Base Assembly. (pages 2-21 & 2-22) Part B 1. Remove the HDD Cartridge. A. Turn the Base Assembly upside down and remove Screw A. (Only the LP200T has this screw.) B.
  • Page 42 2. D ISASSEMBLY 2. Remove the Swivel Stand. A. Turn the Base Assembly upside down. B. Remove 4 screws (A, B, C & D). EMOVING THE WIVEL TAND Swivel Stand . 2-22 3. Separate the Top Cover of the Base Assembly from the rest of the Base Assembly by removing 6 screws (A, B, C, D, E & F). Top Cover (Base Assembly) EMOVING THE OVER OF...
  • Page 43 2. D ISASSEMBLY 4. Separate the Power Supply from the rest of the Base Assembly by removing 4 screws (A, B, C & D). EMOVING THE OWER UPPLY . 2-24 Power Supply Power Supply Removal 2 – 25...

  • Page 44: Usb Board Removal

    USB B OARD EMOVAL The USB Board is in the Base Assembly. Only the LP200C has this feature. Part A Remove the Base Assembly. (pages 2-21 & 2-22) Remove the HDD Cartridge. (Step 1 of Part B of the Power Supply Removal Procedure, page 2-23) Remove the Swivel Stand.

  • Page 45: Hard Disk Drive Removal

    2. D ISASSEMBLY RIVE EMOVAL The HDD is housed in the Base Assembly. Place the LCD PC with its LCD panel facing up and remove Screw A. (Only the LP200T has this screw.) 2. Remove Screw B. A & B EMOVING CREWS .
  • Page 46 2. D ISASSEMBLY 5. Turn the cartridge upside down. 6. Remove Screws A & B to separate the HDD Frame from the Cartridge Casing. HDD F EPARATING THE RAME FROM THE ARTRIDGE ASING . 2-28 7. Remove Screws A, B, C & D to separate the HDD from its frame. EPARATING THE FROM RAME...
  • Page 47 2. D ISASSEMBLY & IEEE1394 M ODEM ODULE ODULE PTIONAL The Fax/Modem and IEEE1394 Modules are optional. Part A Remove the Back Cover. (page 2-4) Remove the I/O Bracket. (page 2-11) Part B IEEE1394 Module Removal 1. Disconnect the IEEE1394 cable from Connector CN16. 2.
  • Page 48 2. D ISASSEMBLY OTES Notes 2 – 30...

  • Page 49: Appendix A. Part Lists

    ISTS This appendix breaks down the LCD PC’s construction into a series of illustrations. The component part numbers are indicated in the tables opposite the drawings. It includes two sets of part lists for the LP200C and the LP200T respectively.
  • Page 50 A. P ISTS LP200C LP200C F RONT SSEMBLY . A–1 Front Assembly (LP200C) A – 2...
  • Page 51 A. P ISTS LP200C F RONT SSEMBLY . A–2 Front Assembly (LP200C) A – 3...
  • Page 52 A. P ISTS LP200C F RONT SSEMBLY III) . A–3 Front Assembly (LP200C) A – 4...
  • Page 53 A. P ISTS LP200C F RONT SSEMBLY . A–4 Front Assembly (LP200C) A – 5...
  • Page 54 A. P ISTS LP200C B SSEMBLY . A–5 Back Assembly (LP200C) A – 6...
  • Page 55 A. P ISTS LP200C B SSEMBLY . A–6 Back Assembly (LP200C) A – 7...
  • Page 56 A. P ISTS LP200C B SSEMBLY III) . A–7 Back Assem- A – 8...
  • Page 57 A. P ISTS LP200C FDD M ODULE . A–8 A – 9 FDD Module (LP200C)
  • Page 58 A. P ISTS LP200C CD D EVICE ODULE . A–9 CD Device Module (LP200C) A – 10...
  • Page 59 A. P ISTS LP200C B SSEMBLY . A–10 Base Assembly (LP200C) A – 11...
  • Page 60 A. P ISTS LP200C B SSEMBLY . A–11 Base Assembly (LP200C) A – 12...
  • Page 61 A. P ISTS LP200C HDD M ODULE . A–12 HDD Module (LP200C) A – 13...
  • Page 62 A. P ISTS LP200T LP200T F RONT SSEMBLY . A–13 Front Assembly (LP200T) A – 14...
  • Page 63 A. P ISTS LP200T F RONT SSEMBLY . A–14 Front Assembly (LP200T) A – 15...
  • Page 64 A. P ISTS LP200T F RONT SSEMBLY III) . A–15 Front Assembly (LP200T) A – 16...
  • Page 65 A. P ISTS LP200T F RONT SSEMBLY . A–16 Front Assembly (LP200T) A – 17...
  • Page 66 A. P ISTS LP200T B SSEMBLY . A–17 Back Assembly (LP200T) A – 18...
  • Page 67 A. P ISTS LP200T B SSEMBLY . A–18 Back Assembly (LP200T) A – 19...
  • Page 68 A. P ISTS LP200T B SSEMBLY III) . A–19 Back Assembly (LP200T) A – 20...
  • Page 69 A. P ISTS LP200T FDD M ODULE . A–20 FDD Module (LP200T) A – 21...
  • Page 70 A. P ISTS LP200T CD D EVICE ODULE . A–21 CD Device Module (LP200T) A – 22...
  • Page 71 A. P ISTS LP200T B SSEMBLY . A–22 Base Assembly (LP200T) A – 23...
  • Page 72 A. P ISTS LP200T B SSEMBLY . A–23 Base Assembly (LP200T) A – 24...
  • Page 73 A. P ISTS LP200T HDD M ODULE . A–24 HDD Module (LP200T) A – 25...
  • Page 74 A. P ISTS OTES Notes A – 26...
  • Page 75 B. S & J WITCHES UMPERS & J WITCHES UMPERS This appendix is about the system’s switches and jumpers. B – 1...
  • Page 76 B. S & J WITCHES UMPERS WITCHES AND UMPERS OCATIONS Switch & Jumper Locations B – 2...

  • Page 77: Switches

    B. S & J WITCHES UMPERS ETTINGS u i t u i t u i t I I I u i t I I I u i t u i t u i t I I I u i t u i t u i t u i t...
  • Page 78 B. S & J WITCHES UMPERS t l u & & & & , i a Switch & Jumper Settings B – 4...

  • Page 79: Circuit

    71-P2205-001 (This is an optional feature.) External USB Board 71-P2206-001 (Only the LP200C has this feature.) We have included the latest versions at the press time. If any board you want to service is newer than listed, please consult the nearest service cneter.
  • Page 80 1000p 1000p 1000p 1000p 1000p HA#[3..31] HREQ#[0..4] HREQ#[0..4] V_CMOS V_CMOS V_CMOS V_CMOS RP17 RN49 FLUSH# R259 ÂÅ ¤Ñ ¹q ¸£ CLEVO CO. HT DI PICD0 A20M# CPUSLP# PICD1 INT R SMI# HTCK R244 PREQ# HTDO INIT # STPCLK# HTMS R240...
  • Page 81 CA151 CB18 CB16 CB17 CB21 T 98 T Z0220 Z0208 R352 8.2K OVT # CPUT 2/PII2 34K_0603(1%) T Z0219 ÂÅ ¤Ñ ¹q ¸£ CLEVO CO. 5,6,7 630SMCLK BAT FAULT #/GPO4 C266 0.1u 0.1u 0.1u 0.1u 0.1u 0.1u 0.1u 0.1u 0.1u...
  • Page 82 HA#[3] 0.1u 10u/16V 1000p SIS-630 630SDCLK Z0339 15_R C116 75 1% Z0338 CLOSE TO SiS-630 C351 ÂÅ ¤Ñ ¹q ¸£ CLEVO CO. CB12 HD#[0..63] ADS# HD#[0..63] ADS# 1000p 150 1% 4.7u_1206_R HA#[3..31] Ti t l e 630-1 (HOST/MEMORY) HA#[0..31] HREQ#[0..4] HREQ#[0..4]...
  • Page 83 1/6 (600 MHz) OVDD AA17 1/7 (700 MHz) OVDD AA18 1/8 (800 MHz) OVDD Reserved 2/13 (650 MHz) 2/15 (750 MHz) ÂÅ ¤Ñ ¹q ¸£ CLEVO CO. SIS-630 2/3 (150 MHz) CT 11 1/2 (200 MHz) CA64 CA61 CA59 CA62 CA60 CA73...
  • Page 84 C132 10u/16V C214 R104 SB3V 3.3V_RX RT CVDD R297 USB-48M Z0508 SB3V 12,15,16,18,19 100K ÂÅ ¤Ñ ¹q ¸£ CLEVO CO. 22u/10V_1206 CT 19 BEAD SB1.8V C124 CA84 CA81 Title 630-4 ( VGA / SOUTH BRIDGE ) 2,3,4,6,7,8,9,10,11,12,13,14,15,16,18,19 22u/10V_1206 0.1u 0.1u +1.8V...
  • Page 85 2,3,4,5,7,8,9,10,11,12,13,14,15,16,18,19 C362 C179 C180 C206 0.1u 470p 0.1u 10UF/10V 22u/10V_1206 ÂÅ ¤Ñ ¹q ¸£ CLEVO CO. T i t l e CLOCK GENERATOR Si z e Document Number LP-200 A3 71-P2200-006 Date: T uesday, June 20, 2000 Sheet System Board (71-P2200-006) - Sheet 6 of 19...
  • Page 86 T Z0722 T Z0719 T 183 T Z0721 CSA#[0..3] T 184 CSA#[0..3] T 178 T 181 ÂÅ ¤Ñ ¹q ¸£ CLEVO CO. CSB#[0..3] T 179 T 180 CSB#[0..3] DIMCLK[0..7] T i t l e SDRAM DIMM1 & DIMM2 DIMCLK[0..7] CKE[0..3] CKE[0..3]...
  • Page 87 R389 BK1608LL121-120 UV1+ UV3+ C130 C129 C273 C274 R114 R113 R390 R391 ÂÅ ¤Ñ ¹q ¸£ CLEVO CO. SB3V 5,12,15,16,18,19 T i t l e CRT,USB,Mini-PCI CONNECTORS 2,5,6,10,11,12,13,14,15,16,17,18,19 Si z e Document Number 2,3,4,5,6,7,9,10,11,12,13,14,15,16,18,19 LP-200 71-P2200-006 Date: Tuesday, June 20, 2000...
  • Page 88 CA37 22P_R 22P_R 10u/16V 0.1u 0.1u 0.1u 0.1u 0.1u 0.1u 0.1u 0.1u 0.1u L105 0_0805 L106 0_0805 ÂÅ ¤Ñ ¹q ¸£ CLEVO CO. Z0902 R227 SCSN CA228 CA229 0_1206 +2.5V 1,6,12,18 CT 8 CA159 CA39 CA30 CA40 CA158 CA42 CA161...
  • Page 89 IDESAB2 4 Z1089 Z1075 R209 IDECSB#0 IDECSB#1 RN39 8P4R x 33 R212 FB19 0_1206 Z1093 LCD-CLK Z1058 ÂÅ ¤Ñ ¹q ¸£ CLEVO CO. 5.6K CT63 CA238 CA239 Z1091 0.1u 0.1u 10u/10V T Z1011 T251 C106 T i t l e CD-LED# IDE &...
  • Page 90 C. C IRCUIT IAGRAMS Titl e Titl e Titl e Titl e Titl e Titl e Titl e S i ze S i ze S i ze S i ze S i ze S i ze S i ze D ocument N umber D ocument N umber D ocument N umber D ocument N umber...
  • Page 91 SDAT IN0 5,16,19 7407 MCLK BCLK BIT_CLK 5,16,19 R314 4,11,13 PCIRST #2 MDC CON. ÂÅ ¤Ñ ¹q ¸£ CLEVO CO. T i t l e LAN & MODEM CONNECTORS Si z e Document Number LP-200 71-P2200-006 Date: Tuesday, June 20, 2000 Sheet System Board (71-P2200-006) - Sheet 12 of 19 C –...
  • Page 92 DREQ1 PWRDN# IRQ11 DREQ3 LA17 IRQ12 DREQ0 LA18 IRQ14 DREQ2 LA19 IRQ15 ÂÅ ¤Ñ ¹q ¸£ CLEVO CO. RN25 8P4R x 10K RN67 8P4R x 10K RN75 8P4R x 10K DREQ5 LA20 Titl e 2,5,6,8,10,11,12,14,15,16,17,18,19 LPC Bridge & Super I/O...
  • Page 93 1N4148 PIN27=GND R333 4.7K R152 4.7K R151 4.7K 2,3,4,5,6,7,8,9,10,11,12,13,15,16,18,19 2,5,6,8,10,11,12,13,15,16,17,18,19 ÂÅ ¤Ñ ¹q ¸£ CLEVO CO. T i t l e PARALLEL & SERIAL PORTS Si z e Document Number LP-200 71-P2200-006 Date: T uesday, June 20, 2000 Sheet System Board (71-P2200-006) - Sheet 14 of 19...
  • Page 94 220p PINGND1~2=GND R665X276D189A R665X276D189A R665X276D189A MT H354D111 M-MARK1 M-MARK1 M-MARK1 M-MARK1 ÂÅ ¤Ñ ¹q ¸£ CLEVO CO. MT H276D118 MT H354D111 MT H354D111 MT H354D111 MT H354D111 MT H354D111 MT H237D110 MT H354D111 MT H354D111 T i t l e BIOS,RTC,PS/2 CON.
  • Page 95 C283 1u/10V_0805 Z1635 RIA# CE11 1000p 630SPK PC_BEEP PCMSPK AGND AGND R454 ÂÅ ¤Ñ ¹q ¸£ CLEVO CO. Title AC'97 CODEC (AKM4543) 2,5,6,8,10,11,12,13,14,15,17,18,19 2,3,4,5,6,7,8,9,10,11,12,13,14,15,18,19 Size Document Number LP-200 71-P2200-006 Date: T uesday, June 20, 2000 Sheet System Board (71-P2200-006) - Sheet 16 of 19...
  • Page 96 HB-1H160-600 Z1721 Z1758 Z1728 2,5,6,8,10,11,12,13,14,15,16,18,19 2K_VR 1N4148 CA207 CA110 CA111 CA209 INVERTER-B CON. 51_0805 ÂÅ ¤Ñ ¹q ¸£ CLEVO CO. 0.1u/50V_0805 0.1u 0.1u 0.1u 07-10494-7C0 T i t le AMPLIFIERS & INVERTER CON. Size Document Number LP-200 71-P2200-006 Date: Tuesday, June 20, 2000...
  • Page 97 R194 C168 POEWR2 CON 10uF/25V_1206 C173 10uF/16V_1206 Z1839 C316 C176 Z1842 10UF/16V_1206 10UF/16V_1206 Z1849 SB5V 12,15 SB5V R195 CLEVO.CO CA234 C301 C167 R191 1uF/50V_0805 T itle POWER 0.1u_0603 10U/16V 5.6V/1W Size Docum ent Num ber EC2QS04 LP200 JBT 0385-100805-4 71-P2200-006...
  • Page 98 8P4R x 22 C3 33 C3 34 C33 5 C3 36 1 0p 10 p 10 p 1 0p 10 p ÂÅ ¤Ñ ¹q ¸£ CLEVO CO. A-CCD1 # A-CCD2# B-CCD1# B-CCD2 # Title RN83 8P4R x 22 CA2 17 CA2 18...
  • Page 99 4.7u/10V_1206 2.2K 4.7u/25V_1206 649 1% NC 1% 0.01u Z0113 Z0114 1K 1% 2K 1% 0.1u ÂÅ ¤Ñ ¹q ¸£ CLEVO CO. T itl e INVERTER Size Document Number 71-P2202-006 LP200 0921 Date: Monday, November 06, 2000 Sheet Inverter Board (71-P2202-006)
  • Page 100 RESET -SW # HDD-LED# 600_0805 PW RBT N# IRMODE CD-LED# RESET RESET FDD-LED# FGND ÂÅ ¤Ñ ¹q ¸£ CLEVO CO. INDICAT OR PW RBT N# T itle RESET -SW # INDICATOR & INVERTER BOARD Size Document Number 71-P2203-007A LP-200 0921...
  • Page 101 C. C IRCUIT IAGRAMS ONVERTER OARD CN2A1 CN2A2 SHARP CN2A1 HV1+HV2+LV Hyundai HV2+LV Converter Board (71-P2204-004) C – 23 CLEVO...
  • Page 102 C. C IRCUIT IAGRAMS IEEE1394 E XTENSION PTIONAL +5 V +3 V CN 1 Z010 1 +3 V PLLVD D PLEASE CLOSE IC Z010 2 D VDD 1 D VDD 2 TSB41LV01 D VDD 3 D VDD 4 .1U F .1U F .1U F .1U F...
  • Page 103 C. C IRCUIT IAGRAMS USB B XTERNAL OARD Only the LP200C has this feature. CN 1 CN 2 U V2- 0 (060 3) U SB-PL UG UV2+ 0 (060 3) V+_OUT1 V+_OUT1 DATA_L1 DATA_L1 DATA_H 1 DATA_H 1 GN D...
  • Page 104 C. C IRCUIT IAGRAMS OTES C – 26...

This manual is also suitable for:

Lp200t

Table of Contents