Clip Led; Output Knob; Input Knob; Expression Assign - DOD TEC8 Owner's Manual

Signal Processing Signal Processing
8) CLIP LED - The red Clip LED lights when clipping occurs at the input of
the TEC8 or when the Master Level may be too high. To eliminate clip-
ping, reduce the setting of the Input Level control or the Master Level
parameter until it only blinks occasionally with peak signals.
9) OUTPUT KNOB - Controls the overall output level of both the Left and
Right outputs and the Headphone output.
10) INPUT KNOB - Controls the level of the signal at the TEC8's input
stage.
11) EXPRESSION PEDAL - Controls the parameter selected by Expression
Assign Group. (See Expression Assign on page 8.)
12) EXPRESSION ASSIGN. - Expression Assign selects which effect para-
meter is controlled by the Expression Pedal.
1) INSTRUMENT INPUT - Plug your instrument in here.
2) HEADPHONE OUTPUT - This stereo mini phone plug is for your head-
phones. The overall headphone level is controlled by the Output level
knob.
3) JAM-A-LONG™ INPUT - This stereo mini jack lets you connect your
tape deck or CD player headphone output to the TEC8 for personal jam
sessions. The Jam-a-Long™ signal is mixed with your instrument signal
at both the main and headphone outputs so you can play along with
your favorite tunes.
4) LEFT / MONO OUT - For stereo applications, this is the Left main out-
put. Use this jack for mono applications.
5) RIGHT OUT - For stereo applications, this is the Right main output. For
mono applications, leave this jack unconnected.
6) AC POWER ADAPTER INPUT - Connect the supplied PS750 AC power
adapter to this jack. Use only the adapter supplied with the TEC8. Use
of any other adapter may damage the unit.
7) POWER CORD STRAIN RELIEF - This clip prevents the AC power cord
from being accidentally pulled out.
USA
Manufactured in the by
INPUT HEADPHONE
A Harman International Company
1 2
JAM-A-LONG LEFT / MONO OUT RIGHT OUT POWER INPUT
9V 500ma
3 4 5 6 7
3